基于CT三维重建煤骨架结构模型的渗流过程动态模拟研究

Translated title of the contribution: Dynamic simulation of seepage process based on CT 3D reconstruction of coal skeleton structure model

Gang Wang, Chenghao Jiang, Shimin Liu, Xiangyu Chu, Junnan Shen

Research output: Contribution to journalArticlepeer-review

11 Scopus citations

Abstract

In order to investigate the seepage change in the microstructure of coal,taking Xinjiang Dahuang Mountain's gas coal as an example,using CT scanning and 3D reconstruction technology,a 3D coal skeleton structure model with pores and fissures is established.On this basis,a fluid solid coupling model which can reflect the dynamic seepage process is constructed.Then combined with the ALE algorithm with Navier-Stokes control equation,the numerical simulation is carried out.The results show that in the process of seepage flow,there is a velocity peak and a steady flow velocity at the each point of the pores and fissures.Compared to the fracture structure,the poor connectivity of pore structure increases the loss of fluid kinetic energy at the front of the model and slows the flow of fluid in the following pores.The initial flow velocity affects the variation trend of flow velocity and fluid density at the inlet,and also changes the peak velocity variation in the fracture.When the initial velocity is lower than 0.03 mm/s,the peak value of velocity in fractures shows a trend of "first increasing,then decreasing" along the seepage direction.When the initial velocity is greater than 0.03 mm/s,the velocity peak decreases along the direction of seepage.At low-pressure gradient condition,there is a nonlinear relationship between the velocity peak and the pressure gradient in the pore fracture structure,while the steady seepage value increases linearly with the increase of the pressure gradient.The results provide a new idea for the study of influencing factors of seepage in future research.

Translated title of the contributionDynamic simulation of seepage process based on CT 3D reconstruction of coal skeleton structure model
Original languageChinese (Traditional)
Pages (from-to)1390-1399
Number of pages10
JournalMeitan Xuebao/Journal of the China Coal Society
Volume43
Issue number5
DOIs
StatePublished - May 1 2018

All Science Journal Classification (ASJC) codes

  • Fuel Technology
  • Geotechnical Engineering and Engineering Geology
  • Energy Engineering and Power Technology
  • Mechanical Engineering
  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'Dynamic simulation of seepage process based on CT 3D reconstruction of coal skeleton structure model'. Together they form a unique fingerprint.

Cite this