Adiabatic effectiveness measurements of endwall film-cooling for a first-stage vane

D. G. Knost, K. A. Thole

Research output: Contribution to journalArticlepeer-review

128 Scopus citations


In gas turbine development, the direction has been toward higher turbine inlet temperatures to increase the work output and thermal efficiency. This extreme environment can significantly impact component life. One means of preventing component burnout in the turbine is to effectively use film-cooling whereby coolant is extracted from the compressor and injected through component surfaces. One such surface is the endwall of the first-stage nozzle guide vane. This paper presents measurements of two endwall film-cooling hole patterns combined with cooling from a flush slot that simulates leakage flow between the combustor and turbine sections. Adiabatic effectiveness measurements showed the slot flow adequately cooled portions of the endwall. Measurements also showed two very difficult regions to cool, including the leading edge and pressure side-endwall junction. As the momentum flux ratios were increased for the film-cooling jets in the stagnation region, the coolant was shown to impact the vane and wash down onto the endwall surface. Along the pressure side of the vane in the upstream portion of the passage, the jets were shown to separate from the surface rather than penetrate to the pressure surface. In the downstream portion of the passage, the jets along the pressure side of the vane were shown to impact the vane thereby eliminating any uncooled regions at the junction. The measurements were also combined with computations to show the importance of considering the trajectory of the flow in the near-wall region, which can be highly influenced by slot leakage flows.

Original languageEnglish (US)
Pages (from-to)297-305
Number of pages9
JournalJournal of Turbomachinery
Issue number2
StatePublished - Apr 2005

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering


Dive into the research topics of 'Adiabatic effectiveness measurements of endwall film-cooling for a first-stage vane'. Together they form a unique fingerprint.

Cite this