An evaluation of a linear clamp pre-load model with respect to milling operations

E. C. De Meter; S. Choudhuri; S. Vallapuzha; R. P. Khetan

An evaluation of a linear clamp pre-load model with respect to milling operations

E. C. De Meter
, S. Choudhuri
, S. Vallapuzha
, R. P. Khetan

Harold and Inge Marcus Department of Industrial and Manufacturing Engineering

Research output: Contribution to conference › Paper › peer-review

2 Scopus citations

Abstract

This paper briefly summarizes the formulation and execution of the Linear, Clamp Pre-Load (LCPL) model. This model is used to compute the minimum clamp pre-loads necessary to keep a workpiece from slipping within a fixturing daring machining. This model takes into account all sources of compliance in the fixture-workpiece system as well as gravity and the system of forces exerted during machining. This paper also describes a series of milling experiments that were used to characterize the accuracy of the LCPL model.

Original language	English (US)
Pages	308-313
Number of pages	6
State	Published - 2001
Event	2001 IEEE/ASME International Conference on Advanced Intelligent Mechatronics Proceedings - Como, Italy Duration: Jul 8 2001 → Jul 12 2001

Other

Other	2001 IEEE/ASME International Conference on Advanced Intelligent Mechatronics Proceedings
Country/Territory	Italy
City	Como
Period	7/8/01 → 7/12/01

All Science Journal Classification (ASJC) codes

General Engineering

Cite this

@conference{37f5fb1695244120aebc87c2e74185bb,

title = "An evaluation of a linear clamp pre-load model with respect to milling operations",

abstract = "This paper briefly summarizes the formulation and execution of the Linear, Clamp Pre-Load (LCPL) model. This model is used to compute the minimum clamp pre-loads necessary to keep a workpiece from slipping within a fixturing daring machining. This model takes into account all sources of compliance in the fixture-workpiece system as well as gravity and the system of forces exerted during machining. This paper also describes a series of milling experiments that were used to characterize the accuracy of the LCPL model.",

author = "\{De Meter\}, \{E. C.\} and S. Choudhuri and S. Vallapuzha and Khetan, \{R. P.\}",

year = "2001",

language = "English (US)",

pages = "308--313",

note = "2001 IEEE/ASME International Conference on Advanced Intelligent Mechatronics Proceedings ; Conference date: 08-07-2001 Through 12-07-2001",

}

TY - CONF

T1 - An evaluation of a linear clamp pre-load model with respect to milling operations

AU - De Meter, E. C.

AU - Choudhuri, S.

AU - Vallapuzha, S.

AU - Khetan, R. P.

PY - 2001

Y1 - 2001

N2 - This paper briefly summarizes the formulation and execution of the Linear, Clamp Pre-Load (LCPL) model. This model is used to compute the minimum clamp pre-loads necessary to keep a workpiece from slipping within a fixturing daring machining. This model takes into account all sources of compliance in the fixture-workpiece system as well as gravity and the system of forces exerted during machining. This paper also describes a series of milling experiments that were used to characterize the accuracy of the LCPL model.

AB - This paper briefly summarizes the formulation and execution of the Linear, Clamp Pre-Load (LCPL) model. This model is used to compute the minimum clamp pre-loads necessary to keep a workpiece from slipping within a fixturing daring machining. This model takes into account all sources of compliance in the fixture-workpiece system as well as gravity and the system of forces exerted during machining. This paper also describes a series of milling experiments that were used to characterize the accuracy of the LCPL model.

UR - https://www.scopus.com/pages/publications/0034859017

UR - https://www.scopus.com/pages/publications/0034859017#tab=citedBy

M3 - Paper

AN - SCOPUS:0034859017

SP - 308

EP - 313

T2 - 2001 IEEE/ASME International Conference on Advanced Intelligent Mechatronics Proceedings

Y2 - 8 July 2001 through 12 July 2001

ER -

An evaluation of a linear clamp pre-load model with respect to milling operations

Abstract

Other

All Science Journal Classification (ASJC) codes

Other files and links

Fingerprint

Cite this