An implicit enumeration approach to tolerance allocation in sequential tolerance control

David L. Wheeler; Tom M. Cavalier; E. Amine Amine Lehtihet

doi:10.1080/07408179908969807

An implicit enumeration approach to tolerance allocation in sequential tolerance control

David L. Wheeler, Tom M. Cavalier, E. Amine Amine Lehtihet

Marcus Department of Industrial and Manufacturing Engineering

Research output: Contribution to journal › Article › peer-review

13 Scopus citations

Abstract

The accuracy and precision of a manufactured dimension is largely dependent on the accuracy and precision of the technological processes selected for its execution. It is not unusual to have available several competing technological processes for execution of each manufacturing operation specified in a process plan, where it is generally assumed that as the precision of the technological process improves, the associated cost and yield of the operation increase. This paper presents an implicit enumeration approach to the selection of an optimum subset of technological processes required to execute a process plan under a. sequential (or adaptive) tolerance control strategy.

Original language	English (US)
Pages (from-to)	75-84
Number of pages	10
Journal	IIE Transactions (Institute of Industrial Engineers)
Volume	31
Issue number	1
DOIs	https://doi.org/10.1080/07408179908969807
State	Published - Jan 1999

All Science Journal Classification (ASJC) codes

Industrial and Manufacturing Engineering

Access to Document

10.1080/07408179908969807

Cite this

@article{e7214a6bd94c4f4ea22f626ab612bd13,

title = "An implicit enumeration approach to tolerance allocation in sequential tolerance control",

abstract = "The accuracy and precision of a manufactured dimension is largely dependent on the accuracy and precision of the technological processes selected for its execution. It is not unusual to have available several competing technological processes for execution of each manufacturing operation specified in a process plan, where it is generally assumed that as the precision of the technological process improves, the associated cost and yield of the operation increase. This paper presents an implicit enumeration approach to the selection of an optimum subset of technological processes required to execute a process plan under a. sequential (or adaptive) tolerance control strategy.",

author = "Wheeler, {David L.} and Cavalier, {Tom M.} and {Amine Lehtihet}, {E. Amine}",

note = "Funding Information: This research is based on work supported by National Science Foundation Grant No. DMI-9622620.",

year = "1999",

month = jan,

doi = "10.1080/07408179908969807",

language = "English (US)",

volume = "31",

pages = "75--84",

journal = "IIE Transactions (Institute of Industrial Engineers)",

issn = "0740-817X",

publisher = "Taylor and Francis Ltd.",

number = "1",

}

TY - JOUR

T1 - An implicit enumeration approach to tolerance allocation in sequential tolerance control

AU - Wheeler, David L.

AU - Cavalier, Tom M.

AU - Amine Lehtihet, E. Amine

N1 - Funding Information: This research is based on work supported by National Science Foundation Grant No. DMI-9622620.

PY - 1999/1

Y1 - 1999/1

N2 - The accuracy and precision of a manufactured dimension is largely dependent on the accuracy and precision of the technological processes selected for its execution. It is not unusual to have available several competing technological processes for execution of each manufacturing operation specified in a process plan, where it is generally assumed that as the precision of the technological process improves, the associated cost and yield of the operation increase. This paper presents an implicit enumeration approach to the selection of an optimum subset of technological processes required to execute a process plan under a. sequential (or adaptive) tolerance control strategy.

AB - The accuracy and precision of a manufactured dimension is largely dependent on the accuracy and precision of the technological processes selected for its execution. It is not unusual to have available several competing technological processes for execution of each manufacturing operation specified in a process plan, where it is generally assumed that as the precision of the technological process improves, the associated cost and yield of the operation increase. This paper presents an implicit enumeration approach to the selection of an optimum subset of technological processes required to execute a process plan under a. sequential (or adaptive) tolerance control strategy.

UR - http://www.scopus.com/inward/record.url?scp=0032679407&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0032679407&partnerID=8YFLogxK

U2 - 10.1080/07408179908969807

DO - 10.1080/07408179908969807

M3 - Article

AN - SCOPUS:0032679407

SN - 0740-817X

VL - 31

SP - 75

EP - 84

JO - IIE Transactions (Institute of Industrial Engineers)

JF - IIE Transactions (Institute of Industrial Engineers)

IS - 1

ER -

An implicit enumeration approach to tolerance allocation in sequential tolerance control

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this