TY - GEN
T1 - Blockage effects from simulated thermal barrier coatings for cylindrical and shaped cooling holes
AU - Whitfield, Christopher A.
AU - Schroeder, Robert P.
AU - Thole, Karen Ann
AU - Lewis, Scott D.
PY - 2014/1/1
Y1 - 2014/1/1
N2 - Film cooling and sprayed thermal barrier coatings (TBCs) protect gas turbine components from the hot combustion gas temperatures. As gas turbine designers pursue higher turbine inlet temperatures, film cooling and thermal barrier coatings are critical in protecting the durability of turbomachinery hardware. One obstacle to the synergy of these technologies is that TBC coatings can block cooling holes when applied to the components, causing a decrease in the film cooling flow area thereby reducing coolant flow for a given pressure ratio. In this study the effect of TBC blockages was simulated on film cooling holes for widely spaced cylindrical and shaped holes. At low blowing ratios for shaped holes the blockages were found to have very little effect on adiabatic effectiveness. At high blowing ratios, the area-averaged effectiveness of shaped and cylindrical holes decreased as much as 75% from blockage. The decrease in area-averaged effectiveness was found to scale best with the effective momentum flux ratio of the jet exiting the film cooling hole for the shaped holes.
AB - Film cooling and sprayed thermal barrier coatings (TBCs) protect gas turbine components from the hot combustion gas temperatures. As gas turbine designers pursue higher turbine inlet temperatures, film cooling and thermal barrier coatings are critical in protecting the durability of turbomachinery hardware. One obstacle to the synergy of these technologies is that TBC coatings can block cooling holes when applied to the components, causing a decrease in the film cooling flow area thereby reducing coolant flow for a given pressure ratio. In this study the effect of TBC blockages was simulated on film cooling holes for widely spaced cylindrical and shaped holes. At low blowing ratios for shaped holes the blockages were found to have very little effect on adiabatic effectiveness. At high blowing ratios, the area-averaged effectiveness of shaped and cylindrical holes decreased as much as 75% from blockage. The decrease in area-averaged effectiveness was found to scale best with the effective momentum flux ratio of the jet exiting the film cooling hole for the shaped holes.
UR - http://www.scopus.com/inward/record.url?scp=84922344757&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84922344757&partnerID=8YFLogxK
U2 - 10.1115/GT2014-25576
DO - 10.1115/GT2014-25576
M3 - Conference contribution
AN - SCOPUS:84922344757
T3 - Proceedings of the ASME Turbo Expo
BT - Heat Transfer
PB - American Society of Mechanical Engineers (ASME)
T2 - ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, GT 2014
Y2 - 16 June 2014 through 20 June 2014
ER -