Correction to: Flaw Identification in Additively Manufactured Parts Using X-ray Computed Tomography and Destructive Serial Sectioning (Journal of Materials Engineering and Performance, (2021), 30, 7, (4958-4964), 10.1007/s11665-021-05567-w)

Zackary Snow; Jayme Keist; Griffin Jones; Rachel Reed; Edward Reutzel; Veeraraghavan Sundar

doi:10.1007/s11665-021-05749-6

Correction to: Flaw Identification in Additively Manufactured Parts Using X-ray Computed Tomography and Destructive Serial Sectioning (Journal of Materials Engineering and Performance, (2021), 30, 7, (4958-4964), 10.1007/s11665-021-05567-w)

Zackary Snow
, Jayme Keist
, Griffin Jones
, Rachel Reed
, Edward Reutzel
, Veeraraghavan Sundar

Research output: Contribution to journal › Comment/debate › peer-review

2 Scopus citations

Abstract

The authors are not listed in the intended order in the published article. The authors wish for the article to be cited as Snow, Z., Keist, J., Jones, G., Reed, R., Reutzel, E., and Sundar V. Flaw Identification in Additively Manufactured Parts UsingX-ray Computed Tomography and Destructive Serial Sectioning. J. of Materi Eng and Perform (2021).

Original language	English (US)
Pages (from-to)	4965
Number of pages	1
Journal	Journal of Materials Engineering and Performance
Volume	30
Issue number	7
DOIs	https://doi.org/10.1007/s11665-021-05749-6
State	Published - Jul 2021

All Science Journal Classification (ASJC) codes

General Materials Science
Mechanics of Materials
Mechanical Engineering

Access to Document

10.1007/s11665-021-05749-6

Fingerprint

Dive into the research topics of 'Correction to: Flaw Identification in Additively Manufactured Parts Using X-ray Computed Tomography and Destructive Serial Sectioning (Journal of Materials Engineering and Performance, (2021), 30, 7, (4958-4964), 10.1007/s11665-021-05567-w)'. Together they form a unique fingerprint.

Cite this

Snow, Z., Keist, J., Jones, G., Reed, R., Reutzel, E., & Sundar, V. (2021). Correction to: Flaw Identification in Additively Manufactured Parts Using X-ray Computed Tomography and Destructive Serial Sectioning (Journal of Materials Engineering and Performance, (2021), 30, 7, (4958-4964), 10.1007/s11665-021-05567-w). Journal of Materials Engineering and Performance, 30(7), 4965. https://doi.org/10.1007/s11665-021-05749-6

Snow, Zackary ; Keist, Jayme ; Jones, Griffin et al. / Correction to : Flaw Identification in Additively Manufactured Parts Using X-ray Computed Tomography and Destructive Serial Sectioning (Journal of Materials Engineering and Performance, (2021), 30, 7, (4958-4964), 10.1007/s11665-021-05567-w). In: Journal of Materials Engineering and Performance. 2021 ; Vol. 30, No. 7. pp. 4965.

@article{b9983ff713ca4c8fa8a53eb5b3752bbe,

title = "Correction to: Flaw Identification in Additively Manufactured Parts Using X-ray Computed Tomography and Destructive Serial Sectioning (Journal of Materials Engineering and Performance, (2021), 30, 7, (4958-4964), 10.1007/s11665-021-05567-w)",

abstract = "The authors are not listed in the intended order in the published article. The authors wish for the article to be cited as Snow, Z., Keist, J., Jones, G., Reed, R., Reutzel, E., and Sundar V. Flaw Identification in Additively Manufactured Parts UsingX-ray Computed Tomography and Destructive Serial Sectioning. J. of Materi Eng and Perform (2021).",

author = "Zackary Snow and Jayme Keist and Griffin Jones and Rachel Reed and Edward Reutzel and Veeraraghavan Sundar",

note = "Publisher Copyright: {\textcopyright} 2021, ASM International.",

year = "2021",

month = jul,

doi = "10.1007/s11665-021-05749-6",

language = "English (US)",

volume = "30",

pages = "4965",

journal = "Journal of Materials Engineering and Performance",

issn = "1059-9495",

publisher = "Springer New York",

number = "7",

}

Snow, Z, Keist, J, Jones, G, Reed, R, Reutzel, E & Sundar, V 2021, 'Correction to: Flaw Identification in Additively Manufactured Parts Using X-ray Computed Tomography and Destructive Serial Sectioning (Journal of Materials Engineering and Performance, (2021), 30, 7, (4958-4964), 10.1007/s11665-021-05567-w)', Journal of Materials Engineering and Performance, vol. 30, no. 7, pp. 4965. https://doi.org/10.1007/s11665-021-05749-6

Correction to: Flaw Identification in Additively Manufactured Parts Using X-ray Computed Tomography and Destructive Serial Sectioning (Journal of Materials Engineering and Performance, (2021), 30, 7, (4958-4964), 10.1007/s11665-021-05567-w). / Snow, Zackary; Keist, Jayme; Jones, Griffin et al.
In: Journal of Materials Engineering and Performance, Vol. 30, No. 7, 07.2021, p. 4965.

Research output: Contribution to journal › Comment/debate › peer-review

TY - JOUR

T1 - Correction to

T2 - Flaw Identification in Additively Manufactured Parts Using X-ray Computed Tomography and Destructive Serial Sectioning (Journal of Materials Engineering and Performance, (2021), 30, 7, (4958-4964), 10.1007/s11665-021-05567-w)

AU - Snow, Zackary

AU - Keist, Jayme

AU - Jones, Griffin

AU - Reed, Rachel

AU - Reutzel, Edward

AU - Sundar, Veeraraghavan

PY - 2021/7

Y1 - 2021/7

N2 - The authors are not listed in the intended order in the published article. The authors wish for the article to be cited as Snow, Z., Keist, J., Jones, G., Reed, R., Reutzel, E., and Sundar V. Flaw Identification in Additively Manufactured Parts UsingX-ray Computed Tomography and Destructive Serial Sectioning. J. of Materi Eng and Perform (2021).

AB - The authors are not listed in the intended order in the published article. The authors wish for the article to be cited as Snow, Z., Keist, J., Jones, G., Reed, R., Reutzel, E., and Sundar V. Flaw Identification in Additively Manufactured Parts UsingX-ray Computed Tomography and Destructive Serial Sectioning. J. of Materi Eng and Perform (2021).

UR - https://www.scopus.com/pages/publications/85104318808

UR - https://www.scopus.com/pages/publications/85104318808#tab=citedBy

U2 - 10.1007/s11665-021-05749-6

DO - 10.1007/s11665-021-05749-6

M3 - Comment/debate

AN - SCOPUS:85104318808

SN - 1059-9495

VL - 30

SP - 4965

JO - Journal of Materials Engineering and Performance

JF - Journal of Materials Engineering and Performance

IS - 7

ER -

Snow Z, Keist J, Jones G, Reed R, Reutzel E, Sundar V. Correction to: Flaw Identification in Additively Manufactured Parts Using X-ray Computed Tomography and Destructive Serial Sectioning (Journal of Materials Engineering and Performance, (2021), 30, 7, (4958-4964), 10.1007/s11665-021-05567-w). Journal of Materials Engineering and Performance. 2021 Jul;30(7):4965. doi: 10.1007/s11665-021-05749-6

Correction to: Flaw Identification in Additively Manufactured Parts Using X-ray Computed Tomography and Destructive Serial Sectioning (Journal of Materials Engineering and Performance, (2021), 30, 7, (4958-4964), 10.1007/s11665-021-05567-w)

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this