Design and analysis of wireless power transfer for non-metallic USB connector

Joshua S. Benjestorf; Aldo W. Morales; Sedig S. Agili

doi:10.1109/ICCE46568.2020.9042993

Design and analysis of wireless power transfer for non-metallic USB connector

Joshua S. Benjestorf, Aldo W. Morales, Sedig S. Agili

School of Science, Engineering & Technology (Harrisburg)

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

The Non-Metallic Connector (NMC) was introduced several years ago. In this new iteration, the NMC has been redesigned to accomplish data transfer with an optical interface and wireless power transfer with the use of micro-inductors. To demonstrate the wireless power transfer (WPT), an NMC for a USB flash drive is proposed. The challenge for the WPT design is to understand the geometric and physical constraints inside the connector housings (form factor). Equations for optimal power transfer performance in this miniature environment are presented followed by simulations that verify the efficient WPT. Initial measurements on the proposed WPT system also validate the concept.

Original language	English (US)
Title of host publication	2020 IEEE International Conference on Consumer Electronics, ICCE 2020
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781728151861
DOIs	https://doi.org/10.1109/ICCE46568.2020.9042993
State	Published - Jan 2020
Event	2020 IEEE International Conference on Consumer Electronics, ICCE 2020 - Las Vegas, United States Duration: Jan 4 2020 → Jan 6 2020

Publication series

Name	Digest of Technical Papers - IEEE International Conference on Consumer Electronics
Volume	2020-January
ISSN (Print)	0747-668X

Conference

Conference	2020 IEEE International Conference on Consumer Electronics, ICCE 2020
Country/Territory	United States
City	Las Vegas
Period	1/4/20 → 1/6/20

All Science Journal Classification (ASJC) codes

Industrial and Manufacturing Engineering
Electrical and Electronic Engineering

Access to Document

10.1109/ICCE46568.2020.9042993

Cite this

Benjestorf, J. S., Morales, A. W., & Agili, S. S. (2020). Design and analysis of wireless power transfer for non-metallic USB connector. In 2020 IEEE International Conference on Consumer Electronics, ICCE 2020 Article 9042993 (Digest of Technical Papers - IEEE International Conference on Consumer Electronics; Vol. 2020-January). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICCE46568.2020.9042993

@inproceedings{88052b5843934ca594d6c2e9b0be832e,

title = "Design and analysis of wireless power transfer for non-metallic USB connector",

abstract = "The Non-Metallic Connector (NMC) was introduced several years ago. In this new iteration, the NMC has been redesigned to accomplish data transfer with an optical interface and wireless power transfer with the use of micro-inductors. To demonstrate the wireless power transfer (WPT), an NMC for a USB flash drive is proposed. The challenge for the WPT design is to understand the geometric and physical constraints inside the connector housings (form factor). Equations for optimal power transfer performance in this miniature environment are presented followed by simulations that verify the efficient WPT. Initial measurements on the proposed WPT system also validate the concept.",

author = "Benjestorf, {Joshua S.} and Morales, {Aldo W.} and Agili, {Sedig S.}",

note = "Publisher Copyright: {\textcopyright} 2020 IEEE.; 2020 IEEE International Conference on Consumer Electronics, ICCE 2020 ; Conference date: 04-01-2020 Through 06-01-2020",

year = "2020",

month = jan,

doi = "10.1109/ICCE46568.2020.9042993",

language = "English (US)",

series = "Digest of Technical Papers - IEEE International Conference on Consumer Electronics",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2020 IEEE International Conference on Consumer Electronics, ICCE 2020",

address = "United States",

}

Benjestorf, JS, Morales, AW & Agili, SS 2020, Design and analysis of wireless power transfer for non-metallic USB connector. in 2020 IEEE International Conference on Consumer Electronics, ICCE 2020., 9042993, Digest of Technical Papers - IEEE International Conference on Consumer Electronics, vol. 2020-January, Institute of Electrical and Electronics Engineers Inc., 2020 IEEE International Conference on Consumer Electronics, ICCE 2020, Las Vegas, United States, 1/4/20. https://doi.org/10.1109/ICCE46568.2020.9042993

Design and analysis of wireless power transfer for non-metallic USB connector. / Benjestorf, Joshua S.; Morales, Aldo W.; Agili, Sedig S.
2020 IEEE International Conference on Consumer Electronics, ICCE 2020. Institute of Electrical and Electronics Engineers Inc., 2020. 9042993 (Digest of Technical Papers - IEEE International Conference on Consumer Electronics; Vol. 2020-January).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - Design and analysis of wireless power transfer for non-metallic USB connector

AU - Benjestorf, Joshua S.

AU - Morales, Aldo W.

AU - Agili, Sedig S.

PY - 2020/1

Y1 - 2020/1

N2 - The Non-Metallic Connector (NMC) was introduced several years ago. In this new iteration, the NMC has been redesigned to accomplish data transfer with an optical interface and wireless power transfer with the use of micro-inductors. To demonstrate the wireless power transfer (WPT), an NMC for a USB flash drive is proposed. The challenge for the WPT design is to understand the geometric and physical constraints inside the connector housings (form factor). Equations for optimal power transfer performance in this miniature environment are presented followed by simulations that verify the efficient WPT. Initial measurements on the proposed WPT system also validate the concept.

AB - The Non-Metallic Connector (NMC) was introduced several years ago. In this new iteration, the NMC has been redesigned to accomplish data transfer with an optical interface and wireless power transfer with the use of micro-inductors. To demonstrate the wireless power transfer (WPT), an NMC for a USB flash drive is proposed. The challenge for the WPT design is to understand the geometric and physical constraints inside the connector housings (form factor). Equations for optimal power transfer performance in this miniature environment are presented followed by simulations that verify the efficient WPT. Initial measurements on the proposed WPT system also validate the concept.

UR - http://www.scopus.com/inward/record.url?scp=85082578652&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85082578652&partnerID=8YFLogxK

U2 - 10.1109/ICCE46568.2020.9042993

DO - 10.1109/ICCE46568.2020.9042993

M3 - Conference contribution

AN - SCOPUS:85082578652

T3 - Digest of Technical Papers - IEEE International Conference on Consumer Electronics

BT - 2020 IEEE International Conference on Consumer Electronics, ICCE 2020

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2020 IEEE International Conference on Consumer Electronics, ICCE 2020

Y2 - 4 January 2020 through 6 January 2020

ER -

Benjestorf JS, Morales AW , Agili SS. Design and analysis of wireless power transfer for non-metallic USB connector. In 2020 IEEE International Conference on Consumer Electronics, ICCE 2020. Institute of Electrical and Electronics Engineers Inc. 2020. 9042993. (Digest of Technical Papers - IEEE International Conference on Consumer Electronics). doi: 10.1109/ICCE46568.2020.9042993

Design and analysis of wireless power transfer for non-metallic USB connector

Abstract

Publication series

Conference

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this