Determination of full matrix material constants of [111]c poled Mn doped 0.24Pb(In1/2Nb1/2)O3-0.46Pb (Mg1/3Nb2/3)O3-0.30PbTiO3 single-domain single crystal using one sample

Shiyang Li; Limei Zheng; Jing Chen; Enwei Sun; Ming Yang; Wenwu Cao

doi:10.1063/1.4960439

Determination of full matrix material constants of [111]_c poled Mn doped 0.24Pb(In_1/2Nb_1/2)O₃-0.46Pb (Mg_1/3Nb_2/3)O₃-0.30PbTiO₃ single-domain single crystal using one sample

Shiyang Li, Limei Zheng, Jing Chen, Enwei Sun, Ming Yang, Wenwu Cao

Research output: Contribution to journal › Article › peer-review

2 Scopus citations

Abstract

To date, there is no report in the literature regarding the full set of material constants of single crystals with 3m symmetries using less than 5 samples. Multiple samples make the data self-consistency difficult due to sample to sample variations, which is severe in ferroelectric materials because the poling depends strongly on the sample geometry. To eliminate errors caused by property variation from sample to sample, a combined ultrasonic and inverse impedance spectroscopy characterization method has been developed, which only needs one small sample to get all constants. The method has been used to determine full matrix material constants of [111]_c poled Mn doped 0.24Pb(In_1/2Nb_1/2)O₃-0.46Pb(Mg_1/3Nb_2/3)O₃-0.30PbTiO₃ single crystals. The validity of this method has been verified by comparing the results with those determined by the traditional resonance method using 5 different geometry samples, and the method was proved stable with input data variation within ±10%.

Original language	English (US)
Article number	064101
Journal	Journal of Applied Physics
Volume	120
Issue number	6
DOIs	https://doi.org/10.1063/1.4960439
State	Published - Aug 14 2016

All Science Journal Classification (ASJC) codes

Physics and Astronomy(all)

Access to Document

10.1063/1.4960439

Cite this

@article{3a1f3968fc794c9cb3e15438c0a4fb37,

title = "Determination of full matrix material constants of [111]c poled Mn doped 0.24Pb(In1/2Nb1/2)O3-0.46Pb (Mg1/3Nb2/3)O3-0.30PbTiO3 single-domain single crystal using one sample",

abstract = "To date, there is no report in the literature regarding the full set of material constants of single crystals with 3m symmetries using less than 5 samples. Multiple samples make the data self-consistency difficult due to sample to sample variations, which is severe in ferroelectric materials because the poling depends strongly on the sample geometry. To eliminate errors caused by property variation from sample to sample, a combined ultrasonic and inverse impedance spectroscopy characterization method has been developed, which only needs one small sample to get all constants. The method has been used to determine full matrix material constants of [111]c poled Mn doped 0.24Pb(In1/2Nb1/2)O3-0.46Pb(Mg1/3Nb2/3)O3-0.30PbTiO3 single crystals. The validity of this method has been verified by comparing the results with those determined by the traditional resonance method using 5 different geometry samples, and the method was proved stable with input data variation within ±10%.",

author = "Shiyang Li and Limei Zheng and Jing Chen and Enwei Sun and Ming Yang and Wenwu Cao",

note = "Funding Information: This research was supported in part by the National Key Basic Research Program (973) of China under Grant No. 2013CB632900 and the NIH under Grant No P41-EB2182. One of the authors (Shiyang Li) acknowledges the support from the National Natural Science Foundation of China (Grant Nos. 51575344, 81571831, 51102062, and 11404209). Publisher Copyright: {\textcopyright} 2016 Author(s).",

year = "2016",

month = aug,

day = "14",

doi = "10.1063/1.4960439",

language = "English (US)",

volume = "120",

journal = "Journal of Applied Physics",

issn = "0021-8979",

publisher = "American Institute of Physics Publising LLC",

number = "6",

}

TY - JOUR

T1 - Determination of full matrix material constants of [111]c poled Mn doped 0.24Pb(In1/2Nb1/2)O3-0.46Pb (Mg1/3Nb2/3)O3-0.30PbTiO3 single-domain single crystal using one sample

AU - Li, Shiyang

AU - Zheng, Limei

AU - Chen, Jing

AU - Sun, Enwei

AU - Yang, Ming

AU - Cao, Wenwu

N1 - Funding Information: This research was supported in part by the National Key Basic Research Program (973) of China under Grant No. 2013CB632900 and the NIH under Grant No P41-EB2182. One of the authors (Shiyang Li) acknowledges the support from the National Natural Science Foundation of China (Grant Nos. 51575344, 81571831, 51102062, and 11404209). Publisher Copyright: © 2016 Author(s).

PY - 2016/8/14

Y1 - 2016/8/14

N2 - To date, there is no report in the literature regarding the full set of material constants of single crystals with 3m symmetries using less than 5 samples. Multiple samples make the data self-consistency difficult due to sample to sample variations, which is severe in ferroelectric materials because the poling depends strongly on the sample geometry. To eliminate errors caused by property variation from sample to sample, a combined ultrasonic and inverse impedance spectroscopy characterization method has been developed, which only needs one small sample to get all constants. The method has been used to determine full matrix material constants of [111]c poled Mn doped 0.24Pb(In1/2Nb1/2)O3-0.46Pb(Mg1/3Nb2/3)O3-0.30PbTiO3 single crystals. The validity of this method has been verified by comparing the results with those determined by the traditional resonance method using 5 different geometry samples, and the method was proved stable with input data variation within ±10%.

AB - To date, there is no report in the literature regarding the full set of material constants of single crystals with 3m symmetries using less than 5 samples. Multiple samples make the data self-consistency difficult due to sample to sample variations, which is severe in ferroelectric materials because the poling depends strongly on the sample geometry. To eliminate errors caused by property variation from sample to sample, a combined ultrasonic and inverse impedance spectroscopy characterization method has been developed, which only needs one small sample to get all constants. The method has been used to determine full matrix material constants of [111]c poled Mn doped 0.24Pb(In1/2Nb1/2)O3-0.46Pb(Mg1/3Nb2/3)O3-0.30PbTiO3 single crystals. The validity of this method has been verified by comparing the results with those determined by the traditional resonance method using 5 different geometry samples, and the method was proved stable with input data variation within ±10%.

UR - http://www.scopus.com/inward/record.url?scp=85020219100&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85020219100&partnerID=8YFLogxK

U2 - 10.1063/1.4960439

DO - 10.1063/1.4960439

M3 - Article

AN - SCOPUS:85020219100

SN - 0021-8979

VL - 120

JO - Journal of Applied Physics

JF - Journal of Applied Physics

IS - 6

M1 - 064101

ER -

Determination of full matrix material constants of [111]_c poled Mn doped 0.24Pb(In_1/2Nb_1/2)O₃-0.46Pb (Mg_1/3Nb_2/3)O₃-0.30PbTiO₃ single-domain single crystal using one sample

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this