Development of a dimethyl ether (DME)-fueled shuttle bus

Jennifer Eirich, Elana Chapman, Howard Glunt, David John Klinikowski, André L. Boehman, James G. Hansel, Edward C. Heydorn

Research output: Contribution to conferencePaperpeer-review

17 Scopus citations


Dimethyl Ether (DME) is a potential ultra-clean diesel fuel. Its unique characteristics require special handling and accommodation of its low viscosity and low lubricity. In this project, DME was blended with diesel fuel to provide sufficient viscosity and lubricity to permit operation of a 7.3 liter turbodiesel engine in a campus shuttle bus with minimal modification of the fuel injection system. A pressurized fuel delivery system was added to the existing common rail injection system on the engine, allowing the DME-diesel fuel blend to be circulated through the rail at pressures above 200 psig keeping the DME in the liquid state. Fuel exiting the rail is cooled by finned tubed heat exchangers and recirculated to the rail using a gear pump. A modified LPG tank (for use on recreational vehicles) stores the DME- diesel fuel blend onboard the shuttle bus. A small cylinder of helium is used to provide a blanket of inert gas above the fuel mixture to keep the DME in the liquid state and to push the mixture to the fuel rails. A significant challenge is posed by the rapid increase in DME vapor pressure with increasing fuel temperature. As the fuel mixture passes through the rail, it is heated by the surrounding surfaces in the cylinder head. The target for maximum fuel rail temperature was set at 50°C, which corresponds to a DME vapor pressure of 150 psig. Refueling was accomplished by mixing the diesel fuel and DME onboard the bus, with diesel fuel delivered from the existing diesel tank and DME delivered by 1000 lb cylinders at a small refueling station. The shuttle bus operates on the Faculty/Staff loop at the University Park campus of the Pennsylvania State University.

Original languageEnglish (US)
StatePublished - Dec 1 2003
Event2003 SAE World Congress - Detroit, MI, United States
Duration: Mar 3 2003Mar 6 2003


Other2003 SAE World Congress
Country/TerritoryUnited States
CityDetroit, MI

All Science Journal Classification (ASJC) codes

  • Automotive Engineering
  • Safety, Risk, Reliability and Quality
  • Pollution
  • Industrial and Manufacturing Engineering


Dive into the research topics of 'Development of a dimethyl ether (DME)-fueled shuttle bus'. Together they form a unique fingerprint.

Cite this