TY - JOUR
T1 - Direct numerical simulation of a pressurized thermal shock scenario at higher reynolds number
AU - Mathur, A.
AU - Kraus, A.
AU - Merzari, E.
AU - Komen, E. M.J.
N1 - Publisher Copyright:
© 2024 Elsevier Ltd
PY - 2024/6/1
Y1 - 2024/6/1
N2 - Direct Numerical Simulation (DNS) is performed for a pressurized thermal shock scenario in a reactor downcomer geometry. In the present work, a simplified representative geometry is adopted where cold fluid injected from a square duct is injected in a planar downcomer. A secondary hot inlet at the top of the downcomer is employed to enforce a downward flow of the injected emergency core cooling water, to mimic the effect of density driven flow. The Reynolds number of the impinging flow, based on bulk velocity and duct height, equals 12,500, while a unity Prandtl number fluid is used. The simulation is performed for two thermal boundary conditions, namely an isotemperature condition and an adiabatic condition, representing the two extreme scenarios of a conjugate heat transfer problem. The instantaneous and mean fields are first analysed in order to study the flow pattern and formation of vortical structures within the downcomer. The impinging flow is deflected radially outwards in the vicinity of the barrel wall, which then interacts with the surrounding hot fluid forming large vortical structures and bringing the cold fluid back to the vessel wall. The mixing of flow and penetration of colder temperatures in the downcomer is observed to be greatly influenced by interaction of these vortical structures. The descending cold plume in the downcomer is observed to form three branches separated by low-speed regions. The maximum values of turbulent kinetic energy are observed only in the vicinity of flow impingement, while high values of its production and dissipation are also observed within the shear layers of the descending plume. The maximum values of temperature fluctuations are found at the interface of the descending cold plume and surrounding hot fluid, while relatively high values are also seen at the locations of large vortical strucutres. Anisotropy in turbulence is also analysed using the componentality contour approach and a modified barycentric colour mapping scheme. Also reported herein is a comparison of mean and statistical profiles with those at lower Reynolds number reported in the literature. At higher Reynolds number, the cold impinging jet is deflected farther outwards in the downcomer. The locations of peak fluctuations in velocity and temperature are also farther away from the impingement. The magnitudes of fluctuating temperature and turbulent kinetic energy are observed to be higher for the present higher Reynolds number case. The peak Nusselt number at the barrel wall is observed to scale with a factor of Re1/2 in the present configuration.
AB - Direct Numerical Simulation (DNS) is performed for a pressurized thermal shock scenario in a reactor downcomer geometry. In the present work, a simplified representative geometry is adopted where cold fluid injected from a square duct is injected in a planar downcomer. A secondary hot inlet at the top of the downcomer is employed to enforce a downward flow of the injected emergency core cooling water, to mimic the effect of density driven flow. The Reynolds number of the impinging flow, based on bulk velocity and duct height, equals 12,500, while a unity Prandtl number fluid is used. The simulation is performed for two thermal boundary conditions, namely an isotemperature condition and an adiabatic condition, representing the two extreme scenarios of a conjugate heat transfer problem. The instantaneous and mean fields are first analysed in order to study the flow pattern and formation of vortical structures within the downcomer. The impinging flow is deflected radially outwards in the vicinity of the barrel wall, which then interacts with the surrounding hot fluid forming large vortical structures and bringing the cold fluid back to the vessel wall. The mixing of flow and penetration of colder temperatures in the downcomer is observed to be greatly influenced by interaction of these vortical structures. The descending cold plume in the downcomer is observed to form three branches separated by low-speed regions. The maximum values of turbulent kinetic energy are observed only in the vicinity of flow impingement, while high values of its production and dissipation are also observed within the shear layers of the descending plume. The maximum values of temperature fluctuations are found at the interface of the descending cold plume and surrounding hot fluid, while relatively high values are also seen at the locations of large vortical strucutres. Anisotropy in turbulence is also analysed using the componentality contour approach and a modified barycentric colour mapping scheme. Also reported herein is a comparison of mean and statistical profiles with those at lower Reynolds number reported in the literature. At higher Reynolds number, the cold impinging jet is deflected farther outwards in the downcomer. The locations of peak fluctuations in velocity and temperature are also farther away from the impingement. The magnitudes of fluctuating temperature and turbulent kinetic energy are observed to be higher for the present higher Reynolds number case. The peak Nusselt number at the barrel wall is observed to scale with a factor of Re1/2 in the present configuration.
UR - http://www.scopus.com/inward/record.url?scp=85187310449&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85187310449&partnerID=8YFLogxK
U2 - 10.1016/j.ijheatmasstransfer.2024.125321
DO - 10.1016/j.ijheatmasstransfer.2024.125321
M3 - Article
AN - SCOPUS:85187310449
SN - 0017-9310
VL - 224
JO - International Journal of Heat and Mass Transfer
JF - International Journal of Heat and Mass Transfer
M1 - 125321
ER -