Direct observations of the formation and growth of austenite from pearlite and allotriomorphic ferrite in a C-Mn steel arc weld

T. A. Palmer; J. W. Elmer

doi:10.1016/j.scriptamat.2005.04.050

Direct observations of the formation and growth of austenite from pearlite and allotriomorphic ferrite in a C-Mn steel arc weld

T. A. Palmer
, J. W. Elmer

Materials Research Institute (MRI)

Research output: Contribution to journal › Article › peer-review

23 Scopus citations

Abstract

The formation and homogenization of austenite from ferrite and pearlite are directly observed in the heat affected zone of a 1045 C-Mn steel arc weld. With rapid heating, cementite does not completely dissolve before the base metal ferrite is transformed, and a second austenite constituent forms. These two austenite constituents exist up to 1400 °C before a single homogeneous austenite phase is produced.

Original language	English (US)
Pages (from-to)	535-540
Number of pages	6
Journal	Scripta Materialia
Volume	53
Issue number	5
DOIs	https://doi.org/10.1016/j.scriptamat.2005.04.050
State	Published - Sep 2005

All Science Journal Classification (ASJC) codes

General Materials Science
Condensed Matter Physics
Mechanics of Materials
Mechanical Engineering
Metals and Alloys

Access to Document

10.1016/j.scriptamat.2005.04.050

Cite this

@article{8fdfb8a7d44348beaed6c25b027610aa,

title = "Direct observations of the formation and growth of austenite from pearlite and allotriomorphic ferrite in a C-Mn steel arc weld",

abstract = "The formation and homogenization of austenite from ferrite and pearlite are directly observed in the heat affected zone of a 1045 C-Mn steel arc weld. With rapid heating, cementite does not completely dissolve before the base metal ferrite is transformed, and a second austenite constituent forms. These two austenite constituents exist up to 1400 °C before a single homogeneous austenite phase is produced.",

author = "Palmer, \{T. A.\} and Elmer, \{J. W.\}",

note = "Funding Information: This work has been performed under the auspices of the US Department of Energy, by the University of California, Lawrence Livermore National Laboratory under Contract No. W-7405-ENG-48. Portions of this research were carried out at the Stanford Synchrotron Radiation Laboratory, a national user facility operated by Stanford University on behalf of the US Department of Energy, Office of Basic Energy Sciences. The authors would also like to thank Prof. T. DebRoy at The Pennsylvania State University for the use of the heat transfer and fluid flow code. ",

year = "2005",

month = sep,

doi = "10.1016/j.scriptamat.2005.04.050",

language = "English (US)",

volume = "53",

pages = "535--540",

journal = "Scripta Materialia",

issn = "1359-6462",

publisher = "Acta Materialia Inc",

number = "5",

}

TY - JOUR

T1 - Direct observations of the formation and growth of austenite from pearlite and allotriomorphic ferrite in a C-Mn steel arc weld

AU - Palmer, T. A.

AU - Elmer, J. W.

N1 - Funding Information: This work has been performed under the auspices of the US Department of Energy, by the University of California, Lawrence Livermore National Laboratory under Contract No. W-7405-ENG-48. Portions of this research were carried out at the Stanford Synchrotron Radiation Laboratory, a national user facility operated by Stanford University on behalf of the US Department of Energy, Office of Basic Energy Sciences. The authors would also like to thank Prof. T. DebRoy at The Pennsylvania State University for the use of the heat transfer and fluid flow code.

PY - 2005/9

Y1 - 2005/9

N2 - The formation and homogenization of austenite from ferrite and pearlite are directly observed in the heat affected zone of a 1045 C-Mn steel arc weld. With rapid heating, cementite does not completely dissolve before the base metal ferrite is transformed, and a second austenite constituent forms. These two austenite constituents exist up to 1400 °C before a single homogeneous austenite phase is produced.

AB - The formation and homogenization of austenite from ferrite and pearlite are directly observed in the heat affected zone of a 1045 C-Mn steel arc weld. With rapid heating, cementite does not completely dissolve before the base metal ferrite is transformed, and a second austenite constituent forms. These two austenite constituents exist up to 1400 °C before a single homogeneous austenite phase is produced.

UR - https://www.scopus.com/pages/publications/20644437094

UR - https://www.scopus.com/pages/publications/20644437094#tab=citedBy

U2 - 10.1016/j.scriptamat.2005.04.050

DO - 10.1016/j.scriptamat.2005.04.050

M3 - Article

AN - SCOPUS:20644437094

SN - 1359-6462

VL - 53

SP - 535

EP - 540

JO - Scripta Materialia

JF - Scripta Materialia

IS - 5

ER -

Direct observations of the formation and growth of austenite from pearlite and allotriomorphic ferrite in a C-Mn steel arc weld

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this