TY - JOUR
T1 - Effect of excitation position of a handheld shaker on fruit removal efficiency and damage in mechanical harvesting of sweet cherry
AU - Zhou, Jianfeng
AU - He, Long
AU - Zhang, Qin
AU - Karkee, Manoj
N1 - Funding Information:
This research was supported in part by Washington State University Agricultural Research Center federal formula funds , Project Nos. WNP0748 and WNP0728 received from the U.S. Department of Agriculture National Institutes for Food and Agriculture (NIFA) and by the USDA Special Crop Research Initiative (SCRI) program (Project No. WPN03320 ). Any opinions, findings, conclusions, or recommendations expressed in this publication are those of the author(s) and do not necessarily reflect the view of the U.S. Department of Agriculture and Washington State University. The authors would also like to express our gratitude to Mr. Patrick Scharf for his help in the fabrication of experiment equipment.
PY - 2014/9
Y1 - 2014/9
N2 - As labour cost keeps rising and labour availability remains increasingly uncertain, growers are seeking mechanical harvesting solutions for fresh-market tree fruit production. To fulfil this need, this research aimed at assessing the effect of excitation position on fruit removal efficiency and fruit damage using a hand-held limb shaker for harvesting sweet cherry. In this study, four excitation positions were selected on each randomly selected limb of "Y" trellis cherry trees. The total number of fruit being removed from five fruiting zones of each limb and those remaining on the tree after harvesting was counted, and harvest-induced damage was assessed. Results showed that fruit removal efficiency from each zone was highly affected by the distance of the zone to the excitation position. The overall fruit removal efficiency was 84% when shaken at the lowest excitation position, and 77%, 51% and 72% respectively as the excitation position moved up the limbs. The fruit damage rates from low to high excitation positions were 20%, 28%, 20% and 23%, which was approximately 10% higher than that of handpicked fruit. No significant difference was found in the fruit damage rate when comparing different excitation positions. It was observed that the fruit removal efficiency may reach up to 97% when the limbs were excited at both the lowest and the highest excitation positions, and adopting such an excitation method could lead to a high fruit removal efficiency with not much increase in fruit damage.
AB - As labour cost keeps rising and labour availability remains increasingly uncertain, growers are seeking mechanical harvesting solutions for fresh-market tree fruit production. To fulfil this need, this research aimed at assessing the effect of excitation position on fruit removal efficiency and fruit damage using a hand-held limb shaker for harvesting sweet cherry. In this study, four excitation positions were selected on each randomly selected limb of "Y" trellis cherry trees. The total number of fruit being removed from five fruiting zones of each limb and those remaining on the tree after harvesting was counted, and harvest-induced damage was assessed. Results showed that fruit removal efficiency from each zone was highly affected by the distance of the zone to the excitation position. The overall fruit removal efficiency was 84% when shaken at the lowest excitation position, and 77%, 51% and 72% respectively as the excitation position moved up the limbs. The fruit damage rates from low to high excitation positions were 20%, 28%, 20% and 23%, which was approximately 10% higher than that of handpicked fruit. No significant difference was found in the fruit damage rate when comparing different excitation positions. It was observed that the fruit removal efficiency may reach up to 97% when the limbs were excited at both the lowest and the highest excitation positions, and adopting such an excitation method could lead to a high fruit removal efficiency with not much increase in fruit damage.
UR - http://www.scopus.com/inward/record.url?scp=84904099322&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84904099322&partnerID=8YFLogxK
U2 - 10.1016/j.biosystemseng.2014.06.016
DO - 10.1016/j.biosystemseng.2014.06.016
M3 - Article
AN - SCOPUS:84904099322
SN - 1537-5110
VL - 125
SP - 36
EP - 44
JO - Biosystems Engineering
JF - Biosystems Engineering
ER -