Effects of an axisymmetric contoured endwall on a nozzle guide vane: Convective heat transfer measurements

A. A. Thrift, K. A. Thole, S. Hada

Research output: Contribution to journalArticlepeer-review

34 Scopus citations

Abstract

Heat transfer is a critical factor in the durability of gas turbine components, particularly in the first vane. An axisymmetric contour is sometimes used to contract the cross sectional area from the combustor to the first stage vane in the turbine. Such contouring can lead to significant changes in the endwall flows, thereby altering the heat transfer. This paper investigates the effect of axisymmetric contouring on the endwall heat transfer of a nozzle guide vane. Heat transfer measurements are performed on the endwalls of a planar and contoured passage whereby one endwall is modified with a linear slope in the case of the contoured passage. Included in this study is upstream leakage flow issuing from a slot normal to the inlet axis. Each of the endwalls within the contoured passage presents a unique flow field. For the contoured passage, the flat endwall is subject to an increased acceleration through the area contraction, while the contoured endwall includes both increased acceleration and a turning of streamlines due to the slope. Results indicate heat transfer is reduced on both endwalls of the contoured passage relative to the planar passage. In the case of all endwalls, increasing leakage mass flow rate leads to an increase in heat transfer near the suction side of the vane leading edge.

Original languageEnglish (US)
Pages (from-to)41008-1-41008-10
JournalJournal of Turbomachinery
Volume133
Issue number4
DOIs
StatePublished - Oct 2011

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering

Fingerprint

Dive into the research topics of 'Effects of an axisymmetric contoured endwall on a nozzle guide vane: Convective heat transfer measurements'. Together they form a unique fingerprint.

Cite this