TY - GEN
T1 - Evaluation of turbulence modeling approaches for cross-flow in a helical tube bundle
AU - Kraus, Adam R.
AU - Yuan, Haomin
AU - Merzari, Elia
N1 - Funding Information:
This work was funded under the auspices of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program of the U.S. Department of Energy, Office of Nuclear Energy. The authors gratefully acknowledge the use of the Advanced Leadership Computing Facility (ALCF) at Argonne National Laboratory.
Publisher Copyright:
Copyright © 2018 ASME.
PY - 2018
Y1 - 2018
N2 - Helical steam generators are proposed for use in a number of advanced nuclear reactor designs. The cross-flow around the helical tubes is a complex flow-field, and accurate knowledge of this flow is necessary for estimating pressure drop, heat transfer, and risk of flow-induced vibration. However, legacy data for helical tube cross-flow are scarce, and building new large-scale experiments that investigate relevant phenomena can be costly. Thus large uncertainties must currently be taken into account in the design of these systems. Numerical modeling with CFD can provide improved insight into the flow phenomena to reduce this uncertainty, but choosing a methodology can prove difficult. LES methods provide high-fidelity data, but require immense computational time to perform even an investigatory calculation for a moderate-sized sector, let alone for many design iterations. URANS methods offer significantly lower computational time, but it can be difficult to confidently justify the accuracy of a particular model without validation, particularly given the highly three-dimensional and complex flow-field present here. To better establish a basis for URANS turbulence modeling, an LES simulation was performed using Nek5000, a massively-parallel spectral element code developed at Argonne National Laboratory, for the geometry of a legacy helical tube bundle experiment. Data from this high-fidelity LES simulation were compared with URANS simulations using a number of turbulence models with the commercial code STAR-CCM+. Turbulent kinetic energy in the flow channels as well as bundle pressure drop were compared. The values of these key parameters were found to vary significantly between different turbulence models, with some models predicting pressure drops and kinetic energies well below those seen in LES. Some models were identified that showed good potential for predicting helical tube bundle flow phenomena. Further work, at a wider range of flow velocities, will be useful to further solidify the range of applicability of these models.
AB - Helical steam generators are proposed for use in a number of advanced nuclear reactor designs. The cross-flow around the helical tubes is a complex flow-field, and accurate knowledge of this flow is necessary for estimating pressure drop, heat transfer, and risk of flow-induced vibration. However, legacy data for helical tube cross-flow are scarce, and building new large-scale experiments that investigate relevant phenomena can be costly. Thus large uncertainties must currently be taken into account in the design of these systems. Numerical modeling with CFD can provide improved insight into the flow phenomena to reduce this uncertainty, but choosing a methodology can prove difficult. LES methods provide high-fidelity data, but require immense computational time to perform even an investigatory calculation for a moderate-sized sector, let alone for many design iterations. URANS methods offer significantly lower computational time, but it can be difficult to confidently justify the accuracy of a particular model without validation, particularly given the highly three-dimensional and complex flow-field present here. To better establish a basis for URANS turbulence modeling, an LES simulation was performed using Nek5000, a massively-parallel spectral element code developed at Argonne National Laboratory, for the geometry of a legacy helical tube bundle experiment. Data from this high-fidelity LES simulation were compared with URANS simulations using a number of turbulence models with the commercial code STAR-CCM+. Turbulent kinetic energy in the flow channels as well as bundle pressure drop were compared. The values of these key parameters were found to vary significantly between different turbulence models, with some models predicting pressure drops and kinetic energies well below those seen in LES. Some models were identified that showed good potential for predicting helical tube bundle flow phenomena. Further work, at a wider range of flow velocities, will be useful to further solidify the range of applicability of these models.
UR - http://www.scopus.com/inward/record.url?scp=85056341902&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85056341902&partnerID=8YFLogxK
U2 - 10.1115/ICONE26-82486
DO - 10.1115/ICONE26-82486
M3 - Conference contribution
AN - SCOPUS:85056341902
T3 - International Conference on Nuclear Engineering, Proceedings, ICONE
BT - Computational Fluid Dynamics (CFD); Nuclear Education and Public Acceptance
PB - American Society of Mechanical Engineers (ASME)
T2 - 2018 26th International Conference on Nuclear Engineering, ICONE 2018
Y2 - 22 July 2018 through 26 July 2018
ER -