Excimer laser crystallized (Pb,La)(Zr,Ti)O3 thin films

S. S.N. Bharadwaja, T. Dechakupt, S. Trolier-Mckinstry, H. Beratan

Research output: Contribution to journalArticlepeer-review

34 Scopus citations

Abstract

A KrF pulsed excimer laser (248 nm) was utilized to crystallize sputtered La-modified Pb(Zr,Ti)O3 (3:30:70) (PLZT) films on LaNiO 3-coated silicon substrates. The film surface was irradiated with defocused laser pulses in an oxygen ambient at various substrate temperatures. Polycrystalline, phase pure perovskite PLZT thin films were produced for substrate temperatures of 250°C and higher. The dielectric constant and loss tangent values of laser-assisted crystallized (10 min exposure at 10 Hz using a substrate temperature of 400°C) PLZT thin films at 10 kHz were 406 and 0.027; in comparison, rapid thermal annealed films (annealed at 700°C for 1 min) showed values of 400 and 0.021, respectively. Laser crystallized films exhibited a remanent polarization value of 14 μC/cm2 with a coercive field |(E+c+E-c)|/2 of 95 kV/cm.

Original languageEnglish (US)
Pages (from-to)1580-1585
Number of pages6
JournalJournal of the American Ceramic Society
Volume91
Issue number5
DOIs
StatePublished - May 2008

All Science Journal Classification (ASJC) codes

  • Ceramics and Composites
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'Excimer laser crystallized (Pb,La)(Zr,Ti)O3 thin films'. Together they form a unique fingerprint.

Cite this