Expérimental design of a two-layer electromagnetically coupled rectangular patch with a global response surface modeling technique

Peter J. Moosbrugger; Zane Lo; Lynn A. Carpenter; Russell R. Barton

doi:10.1109/8.575622

Expérimental design of a two-layer electromagnetically coupled rectangular patch with a global response surface modeling technique

Peter J. Moosbrugger, Zane Lo, Lynn A. Carpenter, Russell R. Barton

Research output: Contribution to journal › Article › peer-review

4 Scopus citations

Abstract

A new approach, based on global response surface (GRS) modeling techniques, is used to design two-layer electroniagnetically coupled rectangular patch antennas. Data from a grid of design points is used to construct a model of the input impedance of the antenna. The model is then optimized to provide the best design geometries for the frequency band of interest. Three examples are presented to validate the method.

Original language	English (US)
Pages (from-to)	781-787
Number of pages	7
Journal	IEEE Transactions on Antennas and Propagation
Volume	45
Issue number	5
DOIs	https://doi.org/10.1109/8.575622
State	Published - 1997

All Science Journal Classification (ASJC) codes

Electrical and Electronic Engineering

Access to Document

10.1109/8.575622

Cite this

@article{c39a39d20fb0436f84d1cd159a57b7d4,

title = "Exp{\'e}rimental design of a two-layer electromagnetically coupled rectangular patch with a global response surface modeling technique",

abstract = "A new approach, based on global response surface (GRS) modeling techniques, is used to design two-layer electroniagnetically coupled rectangular patch antennas. Data from a grid of design points is used to construct a model of the input impedance of the antenna. The model is then optimized to provide the best design geometries for the frequency band of interest. Three examples are presented to validate the method.",

author = "Moosbrugger, {Peter J.} and Zane Lo and Carpenter, {Lynn A.} and Barton, {Russell R.}",

year = "1997",

doi = "10.1109/8.575622",

language = "English (US)",

volume = "45",

pages = "781--787",

journal = "IEEE Transactions on Antennas and Propagation",

issn = "0018-926X",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "5",

}

TY - JOUR

T1 - Expérimental design of a two-layer electromagnetically coupled rectangular patch with a global response surface modeling technique

AU - Moosbrugger, Peter J.

AU - Lo, Zane

AU - Carpenter, Lynn A.

AU - Barton, Russell R.

PY - 1997

Y1 - 1997

N2 - A new approach, based on global response surface (GRS) modeling techniques, is used to design two-layer electroniagnetically coupled rectangular patch antennas. Data from a grid of design points is used to construct a model of the input impedance of the antenna. The model is then optimized to provide the best design geometries for the frequency band of interest. Three examples are presented to validate the method.

AB - A new approach, based on global response surface (GRS) modeling techniques, is used to design two-layer electroniagnetically coupled rectangular patch antennas. Data from a grid of design points is used to construct a model of the input impedance of the antenna. The model is then optimized to provide the best design geometries for the frequency band of interest. Three examples are presented to validate the method.

UR - http://www.scopus.com/inward/record.url?scp=0031145102&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0031145102&partnerID=8YFLogxK

U2 - 10.1109/8.575622

DO - 10.1109/8.575622

M3 - Article

AN - SCOPUS:0031145102

SN - 0018-926X

VL - 45

SP - 781

EP - 787

JO - IEEE Transactions on Antennas and Propagation

JF - IEEE Transactions on Antennas and Propagation

IS - 5

ER -

Expérimental design of a two-layer electromagnetically coupled rectangular patch with a global response surface modeling technique

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this