TY - GEN
T1 - Experiments and modeling of density instabilities driven by interface shear and their influence on removal of sediment from buoyant plumes
AU - Rouhnia, M.
AU - Strom, K.
AU - Liu, X.
N1 - Publisher Copyright:
© 2016 Taylor & Francis Group, London.
PY - 2016
Y1 - 2016
N2 - This paper focuses on the development of the experimental and numerical methods needed to study sedimentation from buoyant river plumes under the effects of shear instabilities. For the experiments, a layer of freshwater and flocculated kaolinite was run over clear saltwater in an acrylic flume. The setup was designed such that measurements could be made from the plume body under steadystate conditions and not just in the propagating plume head. Three-dimensional numerical modeling with Large Eddy Simulations (LES) was also carried out to reveal more detail of the plume dynamics. The primary objective of this paper is to present the methods associated with such experiments. In addition, we present the preliminary findings from the experiment and numerical simulation that suggests that density instabilities and convective sedimentation may not exert strong enhancement on sedimentation rates in the plume body. In fact, the effective shear driven settling velocity extracted from the sediment concentration data was lower than the floc settling velocity observed in saltwater. This information implies that sedimentation from the plume was reduced from what would be expected by the product of local concentration with the particle or aggregate settling velocity. Further investigations are needed to better understand this process.
AB - This paper focuses on the development of the experimental and numerical methods needed to study sedimentation from buoyant river plumes under the effects of shear instabilities. For the experiments, a layer of freshwater and flocculated kaolinite was run over clear saltwater in an acrylic flume. The setup was designed such that measurements could be made from the plume body under steadystate conditions and not just in the propagating plume head. Three-dimensional numerical modeling with Large Eddy Simulations (LES) was also carried out to reveal more detail of the plume dynamics. The primary objective of this paper is to present the methods associated with such experiments. In addition, we present the preliminary findings from the experiment and numerical simulation that suggests that density instabilities and convective sedimentation may not exert strong enhancement on sedimentation rates in the plume body. In fact, the effective shear driven settling velocity extracted from the sediment concentration data was lower than the floc settling velocity observed in saltwater. This information implies that sedimentation from the plume was reduced from what would be expected by the product of local concentration with the particle or aggregate settling velocity. Further investigations are needed to better understand this process.
UR - http://www.scopus.com/inward/record.url?scp=85015335796&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85015335796&partnerID=8YFLogxK
U2 - 10.1201/9781315644479-79
DO - 10.1201/9781315644479-79
M3 - Conference contribution
AN - SCOPUS:85015335796
SN - 9781138029132
T3 - River Flow - Proceedings of the International Conference on Fluvial Hydraulics, RIVER FLOW 2016
SP - 495
EP - 502
BT - River Flow - Proceedings of the International Conference on Fluvial Hydraulics, RIVER FLOW 2016
A2 - Constantinescu, George
A2 - Garcia, Marcelo
A2 - Hanes, Dan
PB - CRC Press/Balkema
T2 - International Conference on Fluvial Hydraulics, RIVER FLOW 2016
Y2 - 11 July 2016 through 14 July 2016
ER -