Fabrication and electrical properties of textured Na1/2Bi 1/2TiO3-BaTiO3 ceramics by reactive-templated grain growth

Y. K. Yan; H. P. Zhou; W. Zhao; D. Liu

doi:10.1007/s10832-007-9140-4

Fabrication and electrical properties of textured Na_1/2Bi _1/2TiO₃-BaTiO₃ ceramics by reactive-templated grain growth

Y. K. Yan, H. P. Zhou, W. Zhao, D. Liu

Materials Science and Engineering

Research output: Contribution to journal › Article › peer-review

24 Scopus citations

Abstract

The <001> fiber-textured Na_1/2 Bi_1/2TiO ₃-BaTiO₃ (6 mol% BaTiO₃) ceramics were fabricated by reactive-templated grain growth (RTGG), using plate-like Bi ₄Ti₃O₁₄ (BiT) particles prepared by a molten salt method as templates. The effects of sintering conditions on texture development and microstructure evolvement were both studied, and the mechanisms of grain orientation and densification were discussed. High Lotgering factor (≥96%) and high density (≥96% theoretic density) textured Na_1/2 Bi_1/2TiO₃-6BaTiO₃ ceramics were prepared by using the max templates concentration supplying 100% Bi in the final product, and sintering at 1200 °C for 10 h. The NBT-6BT obtained exhibited good piezoelectric performance with piezoelectric coefficient d ₃₃ ∈=∈241pC/N, and electromechanical coupling factor k _p ∈=∈41.2%, k _t ∈=∈66.5% at room temperature.

Original language	English (US)
Pages (from-to)	246-250
Number of pages	5
Journal	Journal of Electroceramics
Volume	21
Issue number	1-4 SPEC. ISS.
DOIs	https://doi.org/10.1007/s10832-007-9140-4
State	Published - Dec 2008

All Science Journal Classification (ASJC) codes

Electronic, Optical and Magnetic Materials
Ceramics and Composites
Condensed Matter Physics
Mechanics of Materials
Materials Chemistry
Electrical and Electronic Engineering

Access to Document

10.1007/s10832-007-9140-4

Cite this

@article{470d5ab2f1a948a5933888b9ddc4bd39,

title = "Fabrication and electrical properties of textured Na1/2Bi 1/2TiO3-BaTiO3 ceramics by reactive-templated grain growth",

abstract = "The <001> fiber-textured Na1/2 Bi1/2TiO 3-BaTiO3 (6 mol% BaTiO3) ceramics were fabricated by reactive-templated grain growth (RTGG), using plate-like Bi 4Ti3O14 (BiT) particles prepared by a molten salt method as templates. The effects of sintering conditions on texture development and microstructure evolvement were both studied, and the mechanisms of grain orientation and densification were discussed. High Lotgering factor (≥96%) and high density (≥96% theoretic density) textured Na1/2 Bi1/2TiO3-6BaTiO3 ceramics were prepared by using the max templates concentration supplying 100% Bi in the final product, and sintering at 1200 °C for 10 h. The NBT-6BT obtained exhibited good piezoelectric performance with piezoelectric coefficient d 33 ∈=∈241pC/N, and electromechanical coupling factor k p ∈=∈41.2%, k t ∈=∈66.5% at room temperature.",

author = "Yan, {Y. K.} and Zhou, {H. P.} and W. Zhao and D. Liu",

year = "2008",

month = dec,

doi = "10.1007/s10832-007-9140-4",

language = "English (US)",

volume = "21",

pages = "246--250",

journal = "Journal of Electroceramics",

issn = "1385-3449",

publisher = "Springer Netherlands",

number = "1-4 SPEC. ISS.",

}

TY - JOUR

T1 - Fabrication and electrical properties of textured Na1/2Bi 1/2TiO3-BaTiO3 ceramics by reactive-templated grain growth

AU - Yan, Y. K.

AU - Zhou, H. P.

AU - Zhao, W.

AU - Liu, D.

PY - 2008/12

Y1 - 2008/12

N2 - The <001> fiber-textured Na1/2 Bi1/2TiO 3-BaTiO3 (6 mol% BaTiO3) ceramics were fabricated by reactive-templated grain growth (RTGG), using plate-like Bi 4Ti3O14 (BiT) particles prepared by a molten salt method as templates. The effects of sintering conditions on texture development and microstructure evolvement were both studied, and the mechanisms of grain orientation and densification were discussed. High Lotgering factor (≥96%) and high density (≥96% theoretic density) textured Na1/2 Bi1/2TiO3-6BaTiO3 ceramics were prepared by using the max templates concentration supplying 100% Bi in the final product, and sintering at 1200 °C for 10 h. The NBT-6BT obtained exhibited good piezoelectric performance with piezoelectric coefficient d 33 ∈=∈241pC/N, and electromechanical coupling factor k p ∈=∈41.2%, k t ∈=∈66.5% at room temperature.

AB - The <001> fiber-textured Na1/2 Bi1/2TiO 3-BaTiO3 (6 mol% BaTiO3) ceramics were fabricated by reactive-templated grain growth (RTGG), using plate-like Bi 4Ti3O14 (BiT) particles prepared by a molten salt method as templates. The effects of sintering conditions on texture development and microstructure evolvement were both studied, and the mechanisms of grain orientation and densification were discussed. High Lotgering factor (≥96%) and high density (≥96% theoretic density) textured Na1/2 Bi1/2TiO3-6BaTiO3 ceramics were prepared by using the max templates concentration supplying 100% Bi in the final product, and sintering at 1200 °C for 10 h. The NBT-6BT obtained exhibited good piezoelectric performance with piezoelectric coefficient d 33 ∈=∈241pC/N, and electromechanical coupling factor k p ∈=∈41.2%, k t ∈=∈66.5% at room temperature.

UR - http://www.scopus.com/inward/record.url?scp=67651114134&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=67651114134&partnerID=8YFLogxK

U2 - 10.1007/s10832-007-9140-4

DO - 10.1007/s10832-007-9140-4

M3 - Article

AN - SCOPUS:67651114134

SN - 1385-3449

VL - 21

SP - 246

EP - 250

JO - Journal of Electroceramics

JF - Journal of Electroceramics

IS - 1-4 SPEC. ISS.

ER -

Fabrication and electrical properties of textured Na_1/2Bi _1/2TiO₃-BaTiO₃ ceramics by reactive-templated grain growth

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this