Helium-3 behavior in some nickel-based amorphous alloys

Kenan UEnlue, Dietrich Vincent

Research output: Contribution to journalArticlepeer-review

3 Scopus citations


Helium trapping and release are studied for the nickel-rich amorphous alloys Ni75.1Cr14.0-P10.1C0.08, Ni63.5Zr36.5, and Ni87.7P12.3. Helium-3 is introduced into the samples by implantation at 150-keV energy. The depth distribution of the implanted helium is observed by neutron depth profiling employing the reaction 3He(n,p)3H. Two implantation doses are used: 1×1016 and 5×1016 3He/cm2. Both implantation doses were chosen to be low enough to avoid blistering or flaking of the surface of the samples. The helium release behavior of the samples is studied by taking depth profiles after each annealing stage. At the same time, electron diffraction is used on parallel samples to observe the microstructure of the samples as a function of annealing. The annealing sequence for each material is broken off when electron diffraction indicated the existence of relatively large crystals in a sample. Only a small fraction of the implanted helium is released in most cases, and a clear correlation between helium release and recrystallization can be found in only one case.

Original languageEnglish (US)
Pages (from-to)386-393
Number of pages8
JournalNuclear Science and Engineering
Issue number4
StatePublished - Jan 1 1992

All Science Journal Classification (ASJC) codes

  • Nuclear Energy and Engineering


Dive into the research topics of 'Helium-3 behavior in some nickel-based amorphous alloys'. Together they form a unique fingerprint.

Cite this