High mobility yttrium doped cadmium oxide thin films

Kyle P. Kelley, Edward Sachet, Christopher T. Shelton, Jon Paul Maria

Research output: Contribution to journalArticlepeer-review

45 Scopus citations

Abstract

Donor doped CdO thin films on c-plane sapphire are prepared by reactive co-sputtering from Cd-metal and Y-metal targets which are driven using pulsed-dc and RF power respectively. Intrinsic CdO exhibits a carrier density of 1.8 × 1019 cm-3 and a mobility of 330 cm2 V-1 s-1. By increasing the Y-flux, carrier density values can be increased smoothly and reproducibly to a maximum value of 3.3 × 1020 cm-3. Mobility increases with Y flux, and exhibits a broad plateau between approximately 5 × 1019 cm-3 and 2 × 1020 cm-3. Higher carrier concentrations produce a sharp drop in mobility. The increase in mobility is attributed to a reduction of intrinsic donors (i.e., oxygen vacancies) with increasing carrier density while the ultimate decrease in mobility results from a combination of factors including cadmium vacancies, reduced crystal quality, and smaller crystallite sizes, all of which accompany carrier density values greater than the mid 1020 cm-3 range. This work demonstrates that CdO thin films can be prepared by magnetron sputtering with transport properties and crystal quality that are comparable to those grown using molecular beam epitaxy.

Original languageEnglish (US)
Article number076105
JournalAPL Materials
Volume5
Issue number7
DOIs
StatePublished - Jul 1 2017

All Science Journal Classification (ASJC) codes

  • General Materials Science
  • General Engineering

Fingerprint

Dive into the research topics of 'High mobility yttrium doped cadmium oxide thin films'. Together they form a unique fingerprint.

Cite this