High strain rate deformation behavior of advanced high strength steels for automotive applications

Jinbo Qu; Wael Dabboussi; James Nemes; Steve Yue; Farid Hassani

doi:10.4271/2006-01-1430

High strain rate deformation behavior of advanced high strength steels for automotive applications

Jinbo Qu, Wael Dabboussi, James Nemes, Steve Yue, Farid Hassani

Research output: Contribution to conference › Paper › peer-review

1 Scopus citations

Abstract

The high strain rate deformation behavior of commercially available dual phase steel was studied by means of split Hopkinson bar apparatus in shear punch mode with an emphasis on the influence of microstructure. The cold rolled sheet material was subjected to a variety of heat treatment conditions to produce several different microstructures. Dual phase microstructures with different fractions of martensite were obtained by changing intercritical annealing temperature and time. Various microstructures of ferrite plus pearlite, or acicular ferrite/bainite, or bainite and martensite/carbide were obtained by changing the cooling rate after annealing. The effects of low temperature tempering and bake hardening treatment were also investigated for some selected specimens.

Original language	English (US)
DOIs	https://doi.org/10.4271/2006-01-1430
State	Published - Dec 1 2006
Event	2006 SAE World Congress - Detroit, MI, United States Duration: Apr 3 2006 → Apr 6 2006

Other

Other	2006 SAE World Congress
Country/Territory	United States
City	Detroit, MI
Period	4/3/06 → 4/6/06

All Science Journal Classification (ASJC) codes

Automotive Engineering
Safety, Risk, Reliability and Quality
Pollution
Industrial and Manufacturing Engineering

Access to Document

10.4271/2006-01-1430

Cite this

@conference{f812a5bad33e45359f3217883b618ca6,

title = "High strain rate deformation behavior of advanced high strength steels for automotive applications",

abstract = "The high strain rate deformation behavior of commercially available dual phase steel was studied by means of split Hopkinson bar apparatus in shear punch mode with an emphasis on the influence of microstructure. The cold rolled sheet material was subjected to a variety of heat treatment conditions to produce several different microstructures. Dual phase microstructures with different fractions of martensite were obtained by changing intercritical annealing temperature and time. Various microstructures of ferrite plus pearlite, or acicular ferrite/bainite, or bainite and martensite/carbide were obtained by changing the cooling rate after annealing. The effects of low temperature tempering and bake hardening treatment were also investigated for some selected specimens.",

author = "Jinbo Qu and Wael Dabboussi and James Nemes and Steve Yue and Farid Hassani",

year = "2006",

month = dec,

day = "1",

doi = "10.4271/2006-01-1430",

language = "English (US)",

note = "2006 SAE World Congress ; Conference date: 03-04-2006 Through 06-04-2006",

}

TY - CONF

T1 - High strain rate deformation behavior of advanced high strength steels for automotive applications

AU - Qu, Jinbo

AU - Dabboussi, Wael

AU - Nemes, James

AU - Yue, Steve

AU - Hassani, Farid

PY - 2006/12/1

Y1 - 2006/12/1

N2 - The high strain rate deformation behavior of commercially available dual phase steel was studied by means of split Hopkinson bar apparatus in shear punch mode with an emphasis on the influence of microstructure. The cold rolled sheet material was subjected to a variety of heat treatment conditions to produce several different microstructures. Dual phase microstructures with different fractions of martensite were obtained by changing intercritical annealing temperature and time. Various microstructures of ferrite plus pearlite, or acicular ferrite/bainite, or bainite and martensite/carbide were obtained by changing the cooling rate after annealing. The effects of low temperature tempering and bake hardening treatment were also investigated for some selected specimens.

AB - The high strain rate deformation behavior of commercially available dual phase steel was studied by means of split Hopkinson bar apparatus in shear punch mode with an emphasis on the influence of microstructure. The cold rolled sheet material was subjected to a variety of heat treatment conditions to produce several different microstructures. Dual phase microstructures with different fractions of martensite were obtained by changing intercritical annealing temperature and time. Various microstructures of ferrite plus pearlite, or acicular ferrite/bainite, or bainite and martensite/carbide were obtained by changing the cooling rate after annealing. The effects of low temperature tempering and bake hardening treatment were also investigated for some selected specimens.

UR - http://www.scopus.com/inward/record.url?scp=84877427167&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84877427167&partnerID=8YFLogxK

U2 - 10.4271/2006-01-1430

DO - 10.4271/2006-01-1430

M3 - Paper

T2 - 2006 SAE World Congress

Y2 - 3 April 2006 through 6 April 2006

ER -

High strain rate deformation behavior of advanced high strength steels for automotive applications

Abstract

Other

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this