TY - JOUR
T1 - Influence of Bibenzoate Regioisomers on Cyclohexanedimethanol-Based (Co)polyester Structure-Property Relationships
AU - Mondschein, Ryan J.
AU - Dennis, Joseph M.
AU - Liu, Haoyu
AU - Ramakrishnan, Ramesh K.
AU - Sirrine, Justin M.
AU - Weiseman, Tobin
AU - Colby, Ralph H.
AU - Nazarenko, Sergei
AU - Turner, S. Richard
AU - Long, Timothy E.
N1 - Funding Information:
The authors thank Prof. Robert B. Moore, Dr. Maruti Hegde, and Dr. Allison Pekkanen in the Department of Chemistry at Virginia Tech for insightful discussions. The authors also thank Josh Wolfgang for help with SEC analysis and Dr. Sachin Bobade for his help with DMA analysis of BPA-PC. The authors also appreciate and express gratitude to ExxonMobil for funding and project support.
Publisher Copyright:
© Copyright 2019 American Chemical Society.
PY - 2019/2/12
Y1 - 2019/2/12
N2 - Melt polymerization enabled the synthesis of semi-aromatic (co)polyesters containing 1,4-cyclohexanedimethanol (CHDM), 4,4′-bibenzoate (4,4′BB), and 3,4′-bibenzoate (3,4′BB). Proton nuclear magnetic resonance ( 1 H NMR) spectroscopy confirmed monomer incorporation, and size exclusion chromatography (SEC) revealed molecular weights and polydispersity indices (PDIs) consistent with high conversion melt phase synthesized polyesters. All bibenzoate-based polyesters exhibited a high onset of 5 wt % loss temperature according to thermogravimetric analysis (TGA) (>350 °C), and differential scanning calorimetry (DSC) provided compositionally dependent glass transition temperatures (T g s) approaching 135 °C and crystalline melting temperatures where applicable. Dynamic mechanical analysis (DMA) probed sub-T g β-relaxations with minimal changes in intensity, suggesting that cyclohexyl ring relaxations dominated the low temperature energy absorption for all (co)polyester compositions. Time-temperature superposition (TTS) analysis from melt rheology revealed increasing characteristic relaxation times with increasing 4,4′BB content, which was attributed to the linear 4,4′BB stiffening the polymer chain. Increased kinked 3,4′BB content promoted chain entanglement, resulting in a lower entanglement molecular weight and a higher number of entanglements per chain (N/N e ). Similarly, increases in 3,4′BB content improved tensile yield strength and Young's modulus due to a higher polymer density and potentially due to an increase in entanglement density. Finally, scanning electron microscopy (SEM) suggested mostly brittle failure after necking and strain hardening in tensile specimens. As a result, structure-property relationships afforded insight into regioisomer impacts on thermal, rheological, and mechanical performance for bibenzoate-based (co)polyester regioisomers.
AB - Melt polymerization enabled the synthesis of semi-aromatic (co)polyesters containing 1,4-cyclohexanedimethanol (CHDM), 4,4′-bibenzoate (4,4′BB), and 3,4′-bibenzoate (3,4′BB). Proton nuclear magnetic resonance ( 1 H NMR) spectroscopy confirmed monomer incorporation, and size exclusion chromatography (SEC) revealed molecular weights and polydispersity indices (PDIs) consistent with high conversion melt phase synthesized polyesters. All bibenzoate-based polyesters exhibited a high onset of 5 wt % loss temperature according to thermogravimetric analysis (TGA) (>350 °C), and differential scanning calorimetry (DSC) provided compositionally dependent glass transition temperatures (T g s) approaching 135 °C and crystalline melting temperatures where applicable. Dynamic mechanical analysis (DMA) probed sub-T g β-relaxations with minimal changes in intensity, suggesting that cyclohexyl ring relaxations dominated the low temperature energy absorption for all (co)polyester compositions. Time-temperature superposition (TTS) analysis from melt rheology revealed increasing characteristic relaxation times with increasing 4,4′BB content, which was attributed to the linear 4,4′BB stiffening the polymer chain. Increased kinked 3,4′BB content promoted chain entanglement, resulting in a lower entanglement molecular weight and a higher number of entanglements per chain (N/N e ). Similarly, increases in 3,4′BB content improved tensile yield strength and Young's modulus due to a higher polymer density and potentially due to an increase in entanglement density. Finally, scanning electron microscopy (SEM) suggested mostly brittle failure after necking and strain hardening in tensile specimens. As a result, structure-property relationships afforded insight into regioisomer impacts on thermal, rheological, and mechanical performance for bibenzoate-based (co)polyester regioisomers.
UR - http://www.scopus.com/inward/record.url?scp=85061653824&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85061653824&partnerID=8YFLogxK
U2 - 10.1021/acs.macromol.8b02411
DO - 10.1021/acs.macromol.8b02411
M3 - Article
AN - SCOPUS:85061653824
SN - 0024-9297
VL - 52
SP - 835
EP - 843
JO - Macromolecules
JF - Macromolecules
IS - 3
ER -