Interfacial area transport in horizontal bubbly flow with 90-degree elbow

The present study develops an interfacial area transport equation applicable to an air-water horizontal bubbly flow with a flow restriction. The experiments are performed in a round glass pipe of 50.3 mm inner diameter, along which a 90-degee elbow is installed at L/D=206.6 from the two-phase mixture inlet. In total, 15 different flow conditions in the bubbly flow regime are studied. The detailed local two-phase flow parameters are acquired by a double-sensor conductivity probe at four different axial locations. The effect of elbow is evident in the distribution of local parameters as well as in the development of interfacial structures. The elbow clearly promotes bubble interactions resulting in significant changes in both the void fraction and interfacial area concentration. In the present study, the elbow is found to promote the coalescence mechanism, while reducing the disintegration mechanism. These geometric effects are also reflected in the axial development of one-dimensional two-phase flow parameters. In the present analysis, the interfacial area transport equation is developed in one-dimensional form via area averaging based on the existing model for vertical flow. In the averaging process, characteristic non-uniform distributions of the two-phase flow parameters in horizontal two-phase flow are treated mathematically by covariance calculations. Furthermore, the change in pressure due to the minor loss of the elbow is taken into consideration by using a newly developed correlation analogous to Lockhart and Martinelli's. In total, 60 area-averaged data points are employed to benchmark the present model. The present model predicts the data well with an average percent difference of approximately ±10%.