Motional characteristics of thin piezoelectric rotary motor using cross shaped stator

Taegone Park, Hyonho Chong, Seongsu Jeong, Kenji Uchino

Research output: Contribution to journalArticlepeer-review

7 Scopus citations

Abstract

New type of cross shaped ultrasonic rotary motor was designed and fabricated using a thin brass plate. Cross shaped stator was comprised by attaching ceramic plates on both sides of thin brass plate. When two harmonic voltages which have 90o phase difference were applied to ceramics, the symmetric and anti-symmetric displacements were generated at inside tips to make the elliptical motion. The finite element analysis (ATILA) was used for simulating the motional pattern of contact tips of the stator. Elliptical motions of the contact tips of the stator were consistently obtained at off resonance frequencies. From a prototype motor, speed of 500 rpm was obtained at 16 (Vrms).

Original languageEnglish (US)
Pages (from-to)317-321
Number of pages5
JournalJournal of Electroceramics
Volume23
Issue number2-4
DOIs
StatePublished - Oct 2009

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Ceramics and Composites
  • Condensed Matter Physics
  • Mechanics of Materials
  • Electrical and Electronic Engineering
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'Motional characteristics of thin piezoelectric rotary motor using cross shaped stator'. Together they form a unique fingerprint.

Cite this