Skip to main navigation Skip to search Skip to main content

Operando monitoring of health and overcharge warning in lithium-ion battery with high-sensitivity, small-diameter optical fiber sensor

  • Jiajin Zheng
  • , Jianwen Zhou
  • , Xinyu Wang
  • , Yuxiang Li
  • , Junyu Lu
  • , Shanshan Cao
  • , Ertao Hu
  • , Peng Lv
  • , Kehan Yu
  • , Feifei Shi
  • , Wei Wei

Research output: Contribution to journal › Article › peer-review

Abstract

AbstractUnderstanding the internal temperature changes and electrode volume expansion during battery operation is essential for evaluating performance and state of health. However, the real-time and accurate monitoring of internal battery temperature and structural deformation of active materials remains a significant challenge due to the invasive nature of conventional sensors. To address this issue, this study proposes an innovative approach based on a high-sensitivity, small-diameter fiber Bragg grating (FBG) sensor, which can be embedded within the electrode of a working battery with minimal invasiveness. This method enables real-time monitoring of thermodynamic and electrochemical behavior and introduces a three-level overcharge warning mechanism based on anode strain. Using lithium-ion batteries as an example, this small-diameter and highly sensitive optical sensor capture strain signals generated during the process of lithium-ion insertion and extraction, revealing the dynamic relationship between the mechanical response of electrode materials at the microscale and their electrochemical performance. The study identifies and quantifies a linear relationship between the evolution of electrode strain signals and battery capacity degradation, further verifying the sensitivity and effectiveness of strain signals for early detection of battery safety incidents. These findings provide valuable insights for optimizing battery design and enhancing the safety and reliability of battery systems.

Original languageEnglish (US)
Article number240024
JournalJournal of Power Sources
Volume677
DOIs
StatePublished - Jun 15 2026

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

All Science Journal Classification (ASJC) codes

  • Renewable Energy, Sustainability and the Environment
  • Energy Engineering and Power Technology
  • Physical and Theoretical Chemistry
  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'Operando monitoring of health and overcharge warning in lithium-ion battery with high-sensitivity, small-diameter optical fiber sensor'. Together they form a unique fingerprint.

Cite this