TY - JOUR
T1 - Palygorskite- and Halloysite-TiO2 nanocomposites
T2 - Synthesis and photocatalytic activity
AU - Papoulis, D.
AU - Komarneni, S.
AU - Nikolopoulou, A.
AU - Tsolis-Katagas, P.
AU - Panagiotaras, D.
AU - Kacandes, H. G.
AU - Zhang, P.
AU - Yin, S.
AU - Sato, T.
AU - Katsuki, H.
PY - 2010/9
Y1 - 2010/9
N2 - Palygorskite-TiO2 nanocomposites were prepared by deposition of the anatase form of TiO2 on the clay surfaces using a sol-gel method with titanium isopropoxide as a precursor under hydrothermal treatment at 180°C. The same procedure was followed in the formation of halloysite-TiO2 nanocomposites using a halloysite sample. Phase composition, particle morphology and physical properties of these samples were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM) and microanalysis by energy dispersive spectrometry (EDS), transmission electron microscopy (TEM), attenuated total reflection using Fourier transform infrared spectroscopy (ATR-FTIR) and N2 surface area analysis by BET. The photocatalytic activities of clay-titania nanocomposites in decomposing NOx gas were measured. After treating with TiO2, the halloysite and palygorskite samples showed mesopores of about 5.6 and 6.5nm, respectively, while the macropores of halloysite (central hole in halloysite tubes) disappeared. The latter is attributed to the covering of the central hole in halloysite tubes by TiO2 nanoparticles and for that reason the pore size of the TiO2-treated halloysite was significantly smaller. The clay-titania samples showed significantly higher activity in decomposing NOx gas under visible-light irradiation (Λ>510nm) and UV light irradiation (Λ>290nm) compared to that of the standard commercial titania, P25.
AB - Palygorskite-TiO2 nanocomposites were prepared by deposition of the anatase form of TiO2 on the clay surfaces using a sol-gel method with titanium isopropoxide as a precursor under hydrothermal treatment at 180°C. The same procedure was followed in the formation of halloysite-TiO2 nanocomposites using a halloysite sample. Phase composition, particle morphology and physical properties of these samples were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM) and microanalysis by energy dispersive spectrometry (EDS), transmission electron microscopy (TEM), attenuated total reflection using Fourier transform infrared spectroscopy (ATR-FTIR) and N2 surface area analysis by BET. The photocatalytic activities of clay-titania nanocomposites in decomposing NOx gas were measured. After treating with TiO2, the halloysite and palygorskite samples showed mesopores of about 5.6 and 6.5nm, respectively, while the macropores of halloysite (central hole in halloysite tubes) disappeared. The latter is attributed to the covering of the central hole in halloysite tubes by TiO2 nanoparticles and for that reason the pore size of the TiO2-treated halloysite was significantly smaller. The clay-titania samples showed significantly higher activity in decomposing NOx gas under visible-light irradiation (Λ>510nm) and UV light irradiation (Λ>290nm) compared to that of the standard commercial titania, P25.
UR - http://www.scopus.com/inward/record.url?scp=77957019883&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=77957019883&partnerID=8YFLogxK
U2 - 10.1016/j.clay.2010.07.013
DO - 10.1016/j.clay.2010.07.013
M3 - Article
AN - SCOPUS:77957019883
SN - 0169-1317
VL - 50
SP - 118
EP - 124
JO - Applied Clay Science
JF - Applied Clay Science
IS - 1
ER -