Pentacene TFT driven AM OLED displays

Lisong Zhou; Sungkyu Park; Bo Bai; Jie Sun; Sheng Chu Wu; Thomas N. Jackson; Shelby Nelson; Diane Freeman; Yongtaek Hong

doi:10.1109/LED.2005.853654

Pentacene TFT driven AM OLED displays

Lisong Zhou, Sungkyu Park, Bo Bai, Jie Sun, Sheng Chu Wu, Thomas N. Jackson, Shelby Nelson, Diane Freeman, Yongtaek Hong

Research output: Contribution to journal › Article › peer-review

108 Scopus citations

Abstract

Pentacene organic thin-film transistors (TFTs)-driven active matrix organic light-emitting diode (OLED) displays has been investigated. This letter addresses several process issues unique to this type of display which are important in achieving bright and uniform displays. A bottom contact structure was used to fabricate the pentacene TFT backplane. Polyvinyl alcohol and parylene were used to isolate the pentacene active layer and passivate the backplane. The low processing temperature may allow the use of polymeric substrates and lower cost processing. Uniform TFT performance is achieved with reasonably good mobility and on/off ratio on the back lane. The initial OLED display performance is also presented.

Original language	English (US)
Pages (from-to)	640-642
Number of pages	3
Journal	IEEE Electron Device Letters
Volume	26
Issue number	9
DOIs	https://doi.org/10.1109/LED.2005.853654
State	Published - Sep 2005

All Science Journal Classification (ASJC) codes

Electronic, Optical and Magnetic Materials
Electrical and Electronic Engineering

Access to Document

10.1109/LED.2005.853654

Cite this

@article{3239564d61754565a9eb815b4784cb89,

title = "Pentacene TFT driven AM OLED displays",

abstract = "Pentacene organic thin-film transistors (TFTs)-driven active matrix organic light-emitting diode (OLED) displays has been investigated. This letter addresses several process issues unique to this type of display which are important in achieving bright and uniform displays. A bottom contact structure was used to fabricate the pentacene TFT backplane. Polyvinyl alcohol and parylene were used to isolate the pentacene active layer and passivate the backplane. The low processing temperature may allow the use of polymeric substrates and lower cost processing. Uniform TFT performance is achieved with reasonably good mobility and on/off ratio on the back lane. The initial OLED display performance is also presented.",

author = "Lisong Zhou and Sungkyu Park and Bo Bai and Jie Sun and Wu, {Sheng Chu} and Jackson, {Thomas N.} and Shelby Nelson and Diane Freeman and Yongtaek Hong",

year = "2005",

month = sep,

doi = "10.1109/LED.2005.853654",

language = "English (US)",

volume = "26",

pages = "640--642",

journal = "IEEE Electron Device Letters",

issn = "0741-3106",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "9",

}

TY - JOUR

T1 - Pentacene TFT driven AM OLED displays

AU - Zhou, Lisong

AU - Park, Sungkyu

AU - Bai, Bo

AU - Sun, Jie

AU - Wu, Sheng Chu

AU - Jackson, Thomas N.

AU - Nelson, Shelby

AU - Freeman, Diane

AU - Hong, Yongtaek

PY - 2005/9

Y1 - 2005/9

N2 - Pentacene organic thin-film transistors (TFTs)-driven active matrix organic light-emitting diode (OLED) displays has been investigated. This letter addresses several process issues unique to this type of display which are important in achieving bright and uniform displays. A bottom contact structure was used to fabricate the pentacene TFT backplane. Polyvinyl alcohol and parylene were used to isolate the pentacene active layer and passivate the backplane. The low processing temperature may allow the use of polymeric substrates and lower cost processing. Uniform TFT performance is achieved with reasonably good mobility and on/off ratio on the back lane. The initial OLED display performance is also presented.

AB - Pentacene organic thin-film transistors (TFTs)-driven active matrix organic light-emitting diode (OLED) displays has been investigated. This letter addresses several process issues unique to this type of display which are important in achieving bright and uniform displays. A bottom contact structure was used to fabricate the pentacene TFT backplane. Polyvinyl alcohol and parylene were used to isolate the pentacene active layer and passivate the backplane. The low processing temperature may allow the use of polymeric substrates and lower cost processing. Uniform TFT performance is achieved with reasonably good mobility and on/off ratio on the back lane. The initial OLED display performance is also presented.

UR - http://www.scopus.com/inward/record.url?scp=26444463789&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=26444463789&partnerID=8YFLogxK

U2 - 10.1109/LED.2005.853654

DO - 10.1109/LED.2005.853654

M3 - Article

AN - SCOPUS:26444463789

SN - 0741-3106

VL - 26

SP - 640

EP - 642

JO - IEEE Electron Device Letters

JF - IEEE Electron Device Letters

IS - 9

ER -

Pentacene TFT driven AM OLED displays

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this