Performance and Emissions of a Diesel Engine Using a Coal-Derived Fuel

T. A. Litzinger, T. G. Buzza

Research output: Contribution to journalArticlepeer-review

1 Scopus citations

Abstract

A coal-derived synthetic fuel was blended with a control dieselfuel and then tested in a single-cylinder, direct-injected, diesel engine. Comparisons of the blended fuel to the control Diesel fuel were made on the basis of performance, combustion characteristics, gas-phase emissions, including aldehydes, and particulate emissions. In addition, the mutagenic activity of the soluble organic compounds from the particulates were analyzed using the Ames test. The objective of these experiments was to determine how well the fuel blend would perform as a direct replacement for diesel fuel. Use of the blended fuel decreased performance and increased gas phase emissions, but particulate emissions were unchanged. However, a significant increase in the mutagenic effect of the soluble organic compounds was observed with the blended fuel.

Original languageEnglish (US)
Pages (from-to)30-35
Number of pages6
JournalJournal of Energy Resources Technology, Transactions of the ASME
Volume112
Issue number1
DOIs
StatePublished - Mar 1990

All Science Journal Classification (ASJC) codes

  • Renewable Energy, Sustainability and the Environment
  • Fuel Technology
  • Energy Engineering and Power Technology
  • Mechanical Engineering
  • Geochemistry and Petrology

Fingerprint

Dive into the research topics of 'Performance and Emissions of a Diesel Engine Using a Coal-Derived Fuel'. Together they form a unique fingerprint.

Cite this