Piezoelectric and dielectric properties of PZT-PZN-PMS ceramics prepared by molten salt synthesis method

Zupei Yang; Yunfei Chang; Hui Li

doi:10.1016/j.materresbull.2005.07.010

Piezoelectric and dielectric properties of PZT-PZN-PMS ceramics prepared by molten salt synthesis method

Zupei Yang, Yunfei Chang, Hui Li

Materials Science and Engineering

Research output: Contribution to journal › Article › peer-review

28 Scopus citations

Abstract

Piezoelectric powders and ceramics with the composition of Pb _0.95Sr_0.05(Zr_0.52Ti_0.48)O ₃-Pb(Zn_1/3Nb_2/3)O₃-Pb(Mn _1/3Sb_2/3)O₃ (PZT-PZN-PMS) were prepared by molten salt synthesis (MSS) and conventional mixed-oxide (CMO) methods, respectively. The influence of synthesis process on the properties of powders and ceramics were investigated in detail. The results show that the MSS method significantly improved the sinterability of PZT-PZN-PMS ceramics, resulting in an improvement of dielectric and piezoelectric properties compared to the CMO method. The optimum values of MSS samples are as follows: ε_r = 1773; tan δ = 0.0040; T_c = 280 °C; d₃₃ = 455 pC/N; k_p = 0.70; Q_m = 888; E_c = 10.3 kV/cm; and P_r = 28.2 μC/cm², at calcination of 800 °C and sintering of 1120 °C temperature.

Original language	English (US)
Pages (from-to)	2110-2119
Number of pages	10
Journal	Materials Research Bulletin
Volume	40
Issue number	12
DOIs	https://doi.org/10.1016/j.materresbull.2005.07.010
State	Published - Dec 8 2005

All Science Journal Classification (ASJC) codes

General Materials Science
Condensed Matter Physics
Mechanics of Materials
Mechanical Engineering

Access to Document

10.1016/j.materresbull.2005.07.010

Cite this

@article{7e90ed0919174106be6d3b32a4a26f8d,

title = "Piezoelectric and dielectric properties of PZT-PZN-PMS ceramics prepared by molten salt synthesis method",

abstract = "Piezoelectric powders and ceramics with the composition of Pb 0.95Sr0.05(Zr0.52Ti0.48)O 3-Pb(Zn1/3Nb2/3)O3-Pb(Mn 1/3Sb2/3)O3 (PZT-PZN-PMS) were prepared by molten salt synthesis (MSS) and conventional mixed-oxide (CMO) methods, respectively. The influence of synthesis process on the properties of powders and ceramics were investigated in detail. The results show that the MSS method significantly improved the sinterability of PZT-PZN-PMS ceramics, resulting in an improvement of dielectric and piezoelectric properties compared to the CMO method. The optimum values of MSS samples are as follows: εr = 1773; tan δ = 0.0040; Tc = 280 °C; d33 = 455 pC/N; kp = 0.70; Qm = 888; Ec = 10.3 kV/cm; and Pr = 28.2 μC/cm2, at calcination of 800 °C and sintering of 1120 °C temperature.",

author = "Zupei Yang and Yunfei Chang and Hui Li",

year = "2005",

month = dec,

day = "8",

doi = "10.1016/j.materresbull.2005.07.010",

language = "English (US)",

volume = "40",

pages = "2110--2119",

journal = "Materials Research Bulletin",

issn = "0025-5408",

publisher = "Elsevier Ltd",

number = "12",

}

TY - JOUR

T1 - Piezoelectric and dielectric properties of PZT-PZN-PMS ceramics prepared by molten salt synthesis method

AU - Yang, Zupei

AU - Chang, Yunfei

AU - Li, Hui

PY - 2005/12/8

Y1 - 2005/12/8

N2 - Piezoelectric powders and ceramics with the composition of Pb 0.95Sr0.05(Zr0.52Ti0.48)O 3-Pb(Zn1/3Nb2/3)O3-Pb(Mn 1/3Sb2/3)O3 (PZT-PZN-PMS) were prepared by molten salt synthesis (MSS) and conventional mixed-oxide (CMO) methods, respectively. The influence of synthesis process on the properties of powders and ceramics were investigated in detail. The results show that the MSS method significantly improved the sinterability of PZT-PZN-PMS ceramics, resulting in an improvement of dielectric and piezoelectric properties compared to the CMO method. The optimum values of MSS samples are as follows: εr = 1773; tan δ = 0.0040; Tc = 280 °C; d33 = 455 pC/N; kp = 0.70; Qm = 888; Ec = 10.3 kV/cm; and Pr = 28.2 μC/cm2, at calcination of 800 °C and sintering of 1120 °C temperature.

AB - Piezoelectric powders and ceramics with the composition of Pb 0.95Sr0.05(Zr0.52Ti0.48)O 3-Pb(Zn1/3Nb2/3)O3-Pb(Mn 1/3Sb2/3)O3 (PZT-PZN-PMS) were prepared by molten salt synthesis (MSS) and conventional mixed-oxide (CMO) methods, respectively. The influence of synthesis process on the properties of powders and ceramics were investigated in detail. The results show that the MSS method significantly improved the sinterability of PZT-PZN-PMS ceramics, resulting in an improvement of dielectric and piezoelectric properties compared to the CMO method. The optimum values of MSS samples are as follows: εr = 1773; tan δ = 0.0040; Tc = 280 °C; d33 = 455 pC/N; kp = 0.70; Qm = 888; Ec = 10.3 kV/cm; and Pr = 28.2 μC/cm2, at calcination of 800 °C and sintering of 1120 °C temperature.

UR - http://www.scopus.com/inward/record.url?scp=27644556345&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=27644556345&partnerID=8YFLogxK

U2 - 10.1016/j.materresbull.2005.07.010

DO - 10.1016/j.materresbull.2005.07.010

M3 - Article

AN - SCOPUS:27644556345

SN - 0025-5408

VL - 40

SP - 2110

EP - 2119

JO - Materials Research Bulletin

JF - Materials Research Bulletin

IS - 12

ER -

Piezoelectric and dielectric properties of PZT-PZN-PMS ceramics prepared by molten salt synthesis method

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this