Preparation ofLaiSrCoO3 (x=O, 0.3) by two solution routes

H. Kido; S. Komarneni

doi:10.1117/12.21659

Preparation ofLaiSrCoO3 (x=O, 0.3) by two solution routes

Research output: Contribution to journal › Conference article › peer-review

Abstract

LaixSrxCoO3 (0, 0.3) were prepared by two solution methods using water and hexanoic acid as solvents, respectively. The single phase of LaCoO3 was obtained at 600CC the case of hexanoic acid route, which was about 300'C lower than in the other case with water alone. It was possible to make thin films of the perovskite compounds by controlling the viscosity of the hexanoic acid solutions. These perovskite materials are expected to have applications as oxidizing catalysts in automobiles, as electrodes for zirconia heaters and as cathode materials for C02 lasers.

Original language	English (US)
Pages (from-to)	129-133
Number of pages	5
Journal	Proceedings of SPIE - The International Society for Optical Engineering
Volume	1307
DOIs	https://doi.org/10.1117/12.21659
State	Published - Oct 1 1990
Event	Electro-Optical Materials for Switches, Coatings, Sensor Optics, and Detectors 1990 - Orlando, United States Duration: Apr 16 1990 → Apr 20 1990

All Science Journal Classification (ASJC) codes

Electronic, Optical and Magnetic Materials
Condensed Matter Physics
Computer Science Applications
Applied Mathematics
Electrical and Electronic Engineering

Access to Document

10.1117/12.21659

Cite this

@article{8f730dfe95fc4fd0ba6e4ff5236a90be,

title = "Preparation ofLaiSrCoO3 (x=O, 0.3) by two solution routes",

abstract = "LaixSrxCoO3 (0, 0.3) were prepared by two solution methods using water and hexanoic acid as solvents, respectively. The single phase of LaCoO3 was obtained at 600CC the case of hexanoic acid route, which was about 300'C lower than in the other case with water alone. It was possible to make thin films of the perovskite compounds by controlling the viscosity of the hexanoic acid solutions. These perovskite materials are expected to have applications as oxidizing catalysts in automobiles, as electrodes for zirconia heaters and as cathode materials for C02 lasers.",

author = "H. Kido and S. Komarneni",

note = "Publisher Copyright: {\textcopyright} 1990 SPIE. All rights reserved.; Electro-Optical Materials for Switches, Coatings, Sensor Optics, and Detectors 1990 ; Conference date: 16-04-1990 Through 20-04-1990",

year = "1990",

month = oct,

day = "1",

doi = "10.1117/12.21659",

language = "English (US)",

volume = "1307",

pages = "129--133",

journal = "Proceedings of SPIE - The International Society for Optical Engineering",

issn = "0277-786X",

publisher = "SPIE",

}

TY - JOUR

T1 - Preparation ofLaiSrCoO3 (x=O, 0.3) by two solution routes

AU - Kido, H.

AU - Komarneni, S.

PY - 1990/10/1

Y1 - 1990/10/1

N2 - LaixSrxCoO3 (0, 0.3) were prepared by two solution methods using water and hexanoic acid as solvents, respectively. The single phase of LaCoO3 was obtained at 600CC the case of hexanoic acid route, which was about 300'C lower than in the other case with water alone. It was possible to make thin films of the perovskite compounds by controlling the viscosity of the hexanoic acid solutions. These perovskite materials are expected to have applications as oxidizing catalysts in automobiles, as electrodes for zirconia heaters and as cathode materials for C02 lasers.

AB - LaixSrxCoO3 (0, 0.3) were prepared by two solution methods using water and hexanoic acid as solvents, respectively. The single phase of LaCoO3 was obtained at 600CC the case of hexanoic acid route, which was about 300'C lower than in the other case with water alone. It was possible to make thin films of the perovskite compounds by controlling the viscosity of the hexanoic acid solutions. These perovskite materials are expected to have applications as oxidizing catalysts in automobiles, as electrodes for zirconia heaters and as cathode materials for C02 lasers.

UR - http://www.scopus.com/inward/record.url?scp=85075538093&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85075538093&partnerID=8YFLogxK

U2 - 10.1117/12.21659

DO - 10.1117/12.21659

M3 - Conference article

AN - SCOPUS:85075538093

SN - 0277-786X

VL - 1307

SP - 129

EP - 133

JO - Proceedings of SPIE - The International Society for Optical Engineering

JF - Proceedings of SPIE - The International Society for Optical Engineering

T2 - Electro-Optical Materials for Switches, Coatings, Sensor Optics, and Detectors 1990

Y2 - 16 April 1990 through 20 April 1990

ER -

Preparation ofLaiSrCoO3 (x=O, 0.3) by two solution routes

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this