Quantification of temperature-dependent sorption isotherms in shale gas reservoirs: Experiment and theory

Yun Yang, Shimin Liu, Christopher Clarkson

Research output: Contribution to journalArticlepeer-review

4 Scopus citations

Abstract

A critical component of natural gas in organic-rich shales is adsorbed gas within organic matter. Quantification of adsorbed gas is essential for reliable estimates of gas-in-place in shale reservoirs. However, conventional high-pressure adsorption measurements for coal using the volumetric method are prone to error when applied to characterize sorption isotherm in shale gas systems due to limited adsorption capacity and finer pores of shale matrix. Innovative laboratory apparatus and measurement procedures have been developed to accurately determine the relatively small amount of adsorbed gas in a Marcellus shale sample. The custom-built volumetric apparatus is a differential unit composed of two identical single-sided units (one blank and one adsorption side) connected with a differential pressure transducer. The scale of the differential pressure transducer is 50 psi, a hundred-fold smaller than the absolute pressure transducer measuring to 5,000 psi, leading to a significant increase in the accuracy of adsorption measurement. Methane adsorption isotherms on Marcellus shale are measured at 303, 313, 323, and 333 K with pressure up to 3,000 psi. In addition, a fugacity-based Dubinin-Astakhov (D-A) isotherm is implemented to correct for the nonideality and to predict the temperature dependence of supercritical gas sorption. The Marcellus shale studied generally displays linear correlations between adsorption capacity and pressure over the range of temperature and pressure investigated, indicating the presence of a solute gas component. It is noted that the condensed-phase gas storage exists as the adsorbed gas on the shale surface and dissolved gas in kerogen, where the solute gas amount is proportional to the partial pressure of that gas above the solution. One of the major findings of this work is the experimental observation of the contribution of dissolved gas to total gas storage. With adsorption potential being modeled by a temperature-dependence expression, the D-A isotherm can successfully describe supercritical gas sorption for shale at multiple temperatures. Adsorption capacity significantly decreases with temperature attributed to the isosteric heat of adsorption. Lastly, the broad applicability of the proposed fugacity-based D-A model is also tested for adsorption data provided in the literature for Woodford, Barnett, and Devonian shale. Overall, the fugacity-based D-A isotherm provides precise representations of the temperature-dependent gas adsorption on shales investigated in this work. The application of the proposed adsorption model allows predicting adsorption data at multiple temperatures based on the adsorption data collected at a single temperature. This study lays the foundation for an accurate evaluation of gas storage in shale.

Original languageEnglish (US)
Pages (from-to)3001-3019
Number of pages19
JournalSPE Journal
Volume27
Issue number5
DOIs
StatePublished - Oct 2022

All Science Journal Classification (ASJC) codes

  • Energy Engineering and Power Technology
  • Geotechnical Engineering and Engineering Geology

Fingerprint

Dive into the research topics of 'Quantification of temperature-dependent sorption isotherms in shale gas reservoirs: Experiment and theory'. Together they form a unique fingerprint.

Cite this