Research directions for an open unit manufacturing process repository: A collaborative vision

William Z. Bernstein; Arun Bala Subramaniyan; Alexander Brodsky; Ian C. Garretson; Karl R. Haapala; Don Libes; K. C. Morris; Rong Pan; Vittal Prabhu; Arkopaul Sarkar; Arvind Shankar Raman; Zhenhua Wu

doi:10.1016/j.mfglet.2017.12.007

Research directions for an open unit manufacturing process repository: A collaborative vision

William Z. Bernstein, Arun Bala Subramaniyan, Alexander Brodsky, Ian C. Garretson, Karl R. Haapala, Don Libes, K. C. Morris, Rong Pan, Vittal Prabhu, Arkopaul Sarkar, Arvind Shankar Raman, Zhenhua Wu

Marcus Department of Industrial and Manufacturing Engineering

Research output: Contribution to journal › Article › peer-review

20 Scopus citations

Abstract

The design of manufacturing systems can see dramatic improvements through the use of digital technologies for modeling and simulation prior to deployment. At the 2017 ASME International Manufacturing Science and Engineering Conference held jointly with the 45th SME North American Manufacturing Research Conference, researchers met within a workshop to discuss structuring and presenting research for modeling manufacturing processes to support life cycle assessment. Workshop participants explored a vision for using standard formats to represent manufacturing processes in a community-based repository and identified research opportunities and challenges. This paper places these resulting research directions into a plan for implementing the vision.

Original language	English (US)
Pages (from-to)	71-75
Number of pages	5
Journal	Manufacturing Letters
Volume	15
DOIs	https://doi.org/10.1016/j.mfglet.2017.12.007
State	Published - Jan 2018

All Science Journal Classification (ASJC) codes

Mechanics of Materials
Industrial and Manufacturing Engineering

Access to Document

10.1016/j.mfglet.2017.12.007

Cite this

@article{75d2496ed1f3402f883a1b1c253b7939,

title = "Research directions for an open unit manufacturing process repository: A collaborative vision",

abstract = "The design of manufacturing systems can see dramatic improvements through the use of digital technologies for modeling and simulation prior to deployment. At the 2017 ASME International Manufacturing Science and Engineering Conference held jointly with the 45th SME North American Manufacturing Research Conference, researchers met within a workshop to discuss structuring and presenting research for modeling manufacturing processes to support life cycle assessment. Workshop participants explored a vision for using standard formats to represent manufacturing processes in a community-based repository and identified research opportunities and challenges. This paper places these resulting research directions into a plan for implementing the vision.",

author = "Bernstein, {William Z.} and {Bala Subramaniyan}, Arun and Alexander Brodsky and Garretson, {Ian C.} and Haapala, {Karl R.} and Don Libes and Morris, {K. C.} and Rong Pan and Vittal Prabhu and Arkopaul Sarkar and {Shankar Raman}, Arvind and Zhenhua Wu",

note = "Publisher Copyright: {\textcopyright} 2017",

year = "2018",

month = jan,

doi = "10.1016/j.mfglet.2017.12.007",

language = "English (US)",

volume = "15",

pages = "71--75",

journal = "Manufacturing Letters",

issn = "2213-8463",

publisher = "Society of Manufacturing Engineers",

}

TY - JOUR

T1 - Research directions for an open unit manufacturing process repository

T2 - A collaborative vision

AU - Bernstein, William Z.

AU - Bala Subramaniyan, Arun

AU - Brodsky, Alexander

AU - Garretson, Ian C.

AU - Haapala, Karl R.

AU - Libes, Don

AU - Morris, K. C.

AU - Pan, Rong

AU - Prabhu, Vittal

AU - Sarkar, Arkopaul

AU - Shankar Raman, Arvind

AU - Wu, Zhenhua

PY - 2018/1

Y1 - 2018/1

N2 - The design of manufacturing systems can see dramatic improvements through the use of digital technologies for modeling and simulation prior to deployment. At the 2017 ASME International Manufacturing Science and Engineering Conference held jointly with the 45th SME North American Manufacturing Research Conference, researchers met within a workshop to discuss structuring and presenting research for modeling manufacturing processes to support life cycle assessment. Workshop participants explored a vision for using standard formats to represent manufacturing processes in a community-based repository and identified research opportunities and challenges. This paper places these resulting research directions into a plan for implementing the vision.

AB - The design of manufacturing systems can see dramatic improvements through the use of digital technologies for modeling and simulation prior to deployment. At the 2017 ASME International Manufacturing Science and Engineering Conference held jointly with the 45th SME North American Manufacturing Research Conference, researchers met within a workshop to discuss structuring and presenting research for modeling manufacturing processes to support life cycle assessment. Workshop participants explored a vision for using standard formats to represent manufacturing processes in a community-based repository and identified research opportunities and challenges. This paper places these resulting research directions into a plan for implementing the vision.

UR - http://www.scopus.com/inward/record.url?scp=85039747702&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85039747702&partnerID=8YFLogxK

U2 - 10.1016/j.mfglet.2017.12.007

DO - 10.1016/j.mfglet.2017.12.007

M3 - Article

AN - SCOPUS:85039747702

SN - 2213-8463

VL - 15

SP - 71

EP - 75

JO - Manufacturing Letters

JF - Manufacturing Letters

ER -

Research directions for an open unit manufacturing process repository: A collaborative vision

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this