TY - JOUR
T1 - Study of the filter method for neutron pulse-height distributions measured with organic scintillators
AU - Avdic, S.
AU - Marinkovic, P.
AU - Pozzi, S. A.
AU - Flaska, M.
AU - Dedić, Z.
AU - Osmanovic, A.
N1 - Publisher Copyright:
© 2016 Elsevier Ltd. All rights reserved.
PY - 2016/3/1
Y1 - 2016/3/1
N2 - Identification of neutron sources is of interest in several fields, such as homeland security or basic nuclear physics. Organic scintillators offer the possibility to unfold fast-neutron energy spectra. Since organic scintillators are sensitive to neutrons and gamma-rays, a method to discriminate these two types of particles is required. This paper is focused on investigation of the discrimination properties of the filter method by using a new procedure. We compare the results of an experimental filter method to a digital pulse-shape discrimination (PSD) method based on charge integration. In addition, these methods are compared to the simulation results obtained with the MCNPX-PoliMi code. The experimental and numerical investigations were performed with a 252Cf spontaneous-fission neutron source. The integration of the number of counts gave the relative differences between the experimental filter and digital PSD neutron pulse-height distributions (PHDs) and simulated PHDs less than approximately 5% in the range between 60 keVee and 1.715 MeVee of light output. Above 1.715 MeVee, the PSD method has advantages over the filter method, due to the filter method having significantly worse counting statistics. The results show that the filter method has potential for robust neutron measurements when the PSD method cannot be applied, such as for 'old' organic plastic scintillators without PSD capability.
AB - Identification of neutron sources is of interest in several fields, such as homeland security or basic nuclear physics. Organic scintillators offer the possibility to unfold fast-neutron energy spectra. Since organic scintillators are sensitive to neutrons and gamma-rays, a method to discriminate these two types of particles is required. This paper is focused on investigation of the discrimination properties of the filter method by using a new procedure. We compare the results of an experimental filter method to a digital pulse-shape discrimination (PSD) method based on charge integration. In addition, these methods are compared to the simulation results obtained with the MCNPX-PoliMi code. The experimental and numerical investigations were performed with a 252Cf spontaneous-fission neutron source. The integration of the number of counts gave the relative differences between the experimental filter and digital PSD neutron pulse-height distributions (PHDs) and simulated PHDs less than approximately 5% in the range between 60 keVee and 1.715 MeVee of light output. Above 1.715 MeVee, the PSD method has advantages over the filter method, due to the filter method having significantly worse counting statistics. The results show that the filter method has potential for robust neutron measurements when the PSD method cannot be applied, such as for 'old' organic plastic scintillators without PSD capability.
UR - http://www.scopus.com/inward/record.url?scp=84955249593&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84955249593&partnerID=8YFLogxK
U2 - 10.1016/j.radmeas.2016.01.011
DO - 10.1016/j.radmeas.2016.01.011
M3 - Article
AN - SCOPUS:84955249593
SN - 1350-4487
VL - 86
SP - 32
EP - 38
JO - Radiation Measurements
JF - Radiation Measurements
ER -