³He and BF₃ neutron detector pressure effect and model comparison

Radiation detection systems for homeland security applications must possess the capability of detecting both gamma rays and neutrons. The radiation portal monitor systems that are currently deployed use a plastic scintillator for detecting gamma rays and ³He gas-filled proportional counters for detecting neutrons. Proportional counters filled with ³He are the preferred neutron detectors for use in radiation portal monitor systems because ³He has a large neutron cross-section, is relatively insensitive to gamma-rays, is neither toxic nor corrosive, can withstand extreme environments, and can be operated at a lower voltage than some of the alternative proportional counters. The amount of ³He required for homeland security and science applications has depleted the world supply and there is no longer enough available to fill the demand. Thus, alternative neutron detectors are being explored. Two possible temporary solutions that could be utilized while a more permanent solution is being identified are reducing the ³He pressure in the proportional counters and using boron trifluoride gas-filled proportional counters. Reducing the amount of ³He required in each of the proportional counters would decrease the rate at which ³He is being used; not enough to solve the shortage, but perhaps enough to increase the amount of time available to find a working replacement. Boron trifluoride is not appropriate for all situations as these detectors are less sensitive than ³He, boron trifluoride gas is corrosive, and a much higher voltage is required than what is used with ³He detectors. Measurements of the neutron detection efficiency of ³He and boron trifluoride as a function of tube pressure were made. The experimental results were also used to validate models of the radiation portal monitor systems.