Technical note: A noninvasive urine collection device for female cattle: Modification of the urine cup collection method

Total urine collection from female cattle requires the use of indwelling urinary catheters or an external device requiring secure attachment with adhesive to the animal; neither method is ideal for the welfare of the cattle. A urine collection device was developed to enable total urine collection in female dairy cattle without the use of adhesive to attach the device to the vulva of the animal; the device was a modification of one described previously for female cattle. The urine collection device was made from polypropylene with maximum dimensions (height × width × depth) of 17.5 × 11.0 × 6.0cm and an opening of approximately 42cm² to cover the vulva. The device was secured using a commercially available udder support harness that provided snap-fasteners and support for the device to be positioned at the level of the vulva. At the point of attachment, a metal brace surrounded the device and was connected to the udder support by metal rings, which kept the urine cup in proper position as the animal arched to urinate. A metal O-clamp and pieces of rubber, serving as leak-proof washers, connected the bottom of the device to Gooch tubing. Another metal clamp was attached to a polyvinyl chloride adapter that was connected to a rubber hose, and urine was collected into carboys located on the floor approximately 1.5m behind the animals. This modification of a urine cup allows several noninvasive total feces and urine collection studies of unrestricted length to be undertaken without the use of adhesive to attach the device. The floor-level collection system is a practical, portable, and handy system that will permit researchers to perform nutrient balance and metabolic studies on female cattle.