TY - GEN
T1 - The interaction of downwind sails
AU - Lasher, William C.
PY - 2006
Y1 - 2006
N2 - When a sailboat is sailing in the general direction of the wind, it is known as downwind sailing. Under these conditions boats generally carry two sails - a mainsail and a spinnaker. The flow over these sails is complicated and poorly understood. An issue of importance to sailors is how the adjustment of one sail affects the aerodynamics of the other sail and the total driving force. In the present work a CFD analysis was performed on two different sailboat rigs, with an emphasis on the interactions between the main and spinnaker. The results show that the optimum angle of attack of the mainsail is generally 60° to 70°, depending on the direction of the wind relative to the boat. The correct setting for a mainsail has been a point of debate amongst sailors, and the present analysis supports the theory of easing the mainsail until it luffs (or flaps), then pulling it in. A surprising result is that when the wind is directly behind the boat, the mainsail should not be set to maximize projected area, but eased out past 90°. This is difficult to accomplish in practice due to restrictions of the rig, but raise some interesting questions.
AB - When a sailboat is sailing in the general direction of the wind, it is known as downwind sailing. Under these conditions boats generally carry two sails - a mainsail and a spinnaker. The flow over these sails is complicated and poorly understood. An issue of importance to sailors is how the adjustment of one sail affects the aerodynamics of the other sail and the total driving force. In the present work a CFD analysis was performed on two different sailboat rigs, with an emphasis on the interactions between the main and spinnaker. The results show that the optimum angle of attack of the mainsail is generally 60° to 70°, depending on the direction of the wind relative to the boat. The correct setting for a mainsail has been a point of debate amongst sailors, and the present analysis supports the theory of easing the mainsail until it luffs (or flaps), then pulling it in. A surprising result is that when the wind is directly behind the boat, the mainsail should not be set to maximize projected area, but eased out past 90°. This is difficult to accomplish in practice due to restrictions of the rig, but raise some interesting questions.
UR - http://www.scopus.com/inward/record.url?scp=33845799522&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=33845799522&partnerID=8YFLogxK
M3 - Conference contribution
AN - SCOPUS:33845799522
SN - 0791837831
SN - 9780791837832
T3 - 2006 ASME Joint U.S.-European Fluids Engineering Summer Meeting, FEDSM 2006
BT - 2006 ASME Joint U.S.-European Fluids Engineering Summer Meeting, FEDSM 2006
T2 - 2006 2nd ASME Joint U.S.-European Fluids Engineering Summer Meeting, FEDSM 2006
Y2 - 17 July 2006 through 20 July 2006
ER -