Vibrating needle cutting force

Andrew C. Barnett; Kelilah Wolkowicz; Jason Zachary Moore

doi:10.1115/MSEC2014-4049

Vibrating needle cutting force

Andrew C. Barnett
, Kelilah Wolkowicz
, Jason Zachary Moore

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

13 Scopus citations

Abstract

Needles are one of most commonly used medical devices, used to deliver drugs, biopsy tissue, draw blood, conduct brachytherapy cancer treatment and many other procedures. Maintaining a low insertion force of the needle is important to the success of these procedures. Utilizing vibratory cutting reduces the insertion force, thus improving the outcome of the procedure. This paper describes the experimental setup utilized to test the effectiveness of axial vibration in reducing the insertion force into porcine skin across a range of frequencies, amplitudes and needle sizes. Experiments showed the addition of the vibration was able to reduce the insertion force by up to 35%. The minimum insertion force occurred at lower maximum vibratory insertion speeds for larger diameter needles.

Original language	English (US)
Title of host publication	ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference
Publisher	Web Portal ASME (American Society of Mechanical Engineers)
ISBN (Electronic)	9780791845813
DOIs	https://doi.org/10.1115/MSEC2014-4049
State	Published - 2014
Event	ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference - Detroit, United States Duration: Jun 9 2014 → Jun 13 2014

Publication series

Name	ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference
Volume	2

Other

Other	ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference
Country/Territory	United States
City	Detroit
Period	6/9/14 → 6/13/14

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 3 Good Health and Well-being

All Science Journal Classification (ASJC) codes

Industrial and Manufacturing Engineering

Access to Document

10.1115/MSEC2014-4049

Cite this

Barnett, A. C., Wolkowicz, K., & Moore, J. Z. (2014). Vibrating needle cutting force. In ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference Article V002T02A025 (ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference; Vol. 2). Web Portal ASME (American Society of Mechanical Engineers). https://doi.org/10.1115/MSEC2014-4049

Barnett, Andrew C. ; Wolkowicz, Kelilah ; Moore, Jason Zachary. / Vibrating needle cutting force. ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference. Web Portal ASME (American Society of Mechanical Engineers), 2014. (ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference).

@inproceedings{408cbb804287489cb0a770a124640dfb,

title = "Vibrating needle cutting force",

abstract = "Needles are one of most commonly used medical devices, used to deliver drugs, biopsy tissue, draw blood, conduct brachytherapy cancer treatment and many other procedures. Maintaining a low insertion force of the needle is important to the success of these procedures. Utilizing vibratory cutting reduces the insertion force, thus improving the outcome of the procedure. This paper describes the experimental setup utilized to test the effectiveness of axial vibration in reducing the insertion force into porcine skin across a range of frequencies, amplitudes and needle sizes. Experiments showed the addition of the vibration was able to reduce the insertion force by up to 35\%. The minimum insertion force occurred at lower maximum vibratory insertion speeds for larger diameter needles.",

author = "Barnett, \{Andrew C.\} and Kelilah Wolkowicz and Moore, \{Jason Zachary\}",

note = "Publisher Copyright: Copyright {\textcopyright} 2014 by ASME.; ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference ; Conference date: 09-06-2014 Through 13-06-2014",

year = "2014",

doi = "10.1115/MSEC2014-4049",

language = "English (US)",

series = "ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference",

publisher = "Web Portal ASME (American Society of Mechanical Engineers)",

booktitle = "ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference",

}

Barnett, AC, Wolkowicz, K & Moore, JZ 2014, Vibrating needle cutting force. in ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference., V002T02A025, ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference, vol. 2, Web Portal ASME (American Society of Mechanical Engineers), ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference, Detroit, United States, 6/9/14. https://doi.org/10.1115/MSEC2014-4049

Vibrating needle cutting force. / Barnett, Andrew C.; Wolkowicz, Kelilah; Moore, Jason Zachary.
ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference. Web Portal ASME (American Society of Mechanical Engineers), 2014. V002T02A025 (ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference; Vol. 2).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - Vibrating needle cutting force

AU - Barnett, Andrew C.

AU - Wolkowicz, Kelilah

AU - Moore, Jason Zachary

PY - 2014

Y1 - 2014

N2 - Needles are one of most commonly used medical devices, used to deliver drugs, biopsy tissue, draw blood, conduct brachytherapy cancer treatment and many other procedures. Maintaining a low insertion force of the needle is important to the success of these procedures. Utilizing vibratory cutting reduces the insertion force, thus improving the outcome of the procedure. This paper describes the experimental setup utilized to test the effectiveness of axial vibration in reducing the insertion force into porcine skin across a range of frequencies, amplitudes and needle sizes. Experiments showed the addition of the vibration was able to reduce the insertion force by up to 35%. The minimum insertion force occurred at lower maximum vibratory insertion speeds for larger diameter needles.

AB - Needles are one of most commonly used medical devices, used to deliver drugs, biopsy tissue, draw blood, conduct brachytherapy cancer treatment and many other procedures. Maintaining a low insertion force of the needle is important to the success of these procedures. Utilizing vibratory cutting reduces the insertion force, thus improving the outcome of the procedure. This paper describes the experimental setup utilized to test the effectiveness of axial vibration in reducing the insertion force into porcine skin across a range of frequencies, amplitudes and needle sizes. Experiments showed the addition of the vibration was able to reduce the insertion force by up to 35%. The minimum insertion force occurred at lower maximum vibratory insertion speeds for larger diameter needles.

UR - https://www.scopus.com/pages/publications/84908433297

UR - https://www.scopus.com/pages/publications/84908433297#tab=citedBy

U2 - 10.1115/MSEC2014-4049

DO - 10.1115/MSEC2014-4049

M3 - Conference contribution

AN - SCOPUS:84908433297

T3 - ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference

BT - ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference

PB - Web Portal ASME (American Society of Mechanical Engineers)

T2 - ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference

Y2 - 9 June 2014 through 13 June 2014

ER -

Barnett AC, Wolkowicz K, Moore JZ. Vibrating needle cutting force. In ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference. Web Portal ASME (American Society of Mechanical Engineers). 2014. V002T02A025. (ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference). doi: 10.1115/MSEC2014-4049

Vibrating needle cutting force

Abstract

Publication series

Other

UN SDGs

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this