Water management in PEMFCs using absorbent wicks

Shan Hai Ge, Xu Guang Li, I. Ming Hsing

Research output: Contribution to journalArticlepeer-review

56 Scopus citations


A water management strategy for polymer electrolyte membrane fuel cells (PEMFCs) using different kinds of absorbent wicks was investigated. Through this technology, water produced by the electrochemical reaction is transported to the inlet region of the reactant gas and used to humidify the dry reactant gas on the cathode side. For the thin membrane (Nation 112) used, the back-diffusion of water from the cathode to the anode is sufficient to humidify dry hydrogen and to prevent drying out of the anode in the counterflow mode. Due to an improved water distribution in the whole region of the cell, PEMFC with superabsorbent wicks can be operated without external humidification of the reactant gases and still outperform the common one without wicks operated with dry or humidified gases. The performance of the cell with superabsorbent sponge was stable under high-current-density conditions (I/ = 1.2 A/cm2), and little performance degradation was observed over a 120 h investigation period when both dry hydronen and dry air were fed.

Original languageEnglish (US)
Pages (from-to)B523-B528
JournalJournal of the Electrochemical Society
Issue number9
StatePublished - 2004

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Renewable Energy, Sustainability and the Environment
  • Surfaces, Coatings and Films
  • Electrochemistry
  • Materials Chemistry


Dive into the research topics of 'Water management in PEMFCs using absorbent wicks'. Together they form a unique fingerprint.

Cite this